Toolless motherboard standoffs with clip-on retaining washers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ATX/mATX/ITX motherboard standoffs with clip-on retaining washers. Raises the motherboard ~9.5mm off the ground.
- Rating
- 5 / 5
- Likes
- 70
- Downloads
- 257
- Makes
- 1
- Views
- 1,380
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
ATX motherboard standoffs with clip-on washers for a semi-secure fit. Raises the motherboard ~9.5mm off the ground. Useful for tinkering where you need easy access to the components.
I made these standoffs while designing a 10 inch rack mountable ITX chassis. They proved to work really well on their own so I'm uploading the standoffs as a separate model.
The clip-ons fit snugly on motherboards with 1.6mm thickness, which should fit most *TX motherboards. If your motherboard is of a different thickness you can still use the standoffs, but the retaining washer might not latch on properly. Let me know if I should add more models for different thicknesses.
Printed at 0.2mm layer height, 3 walls and 20% infill (or more). PLA works fine.
