1 / 5
Bambu Lab P1P/P1S/X1 motherboard 60mm fan holder 6025 NF-A6x25 — zdjęcie 1
1 / 5

Bambu Lab P1P/P1S/X1 motherboard 60mm fan holder 6025 NF-A6x25

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bracket for a 60x25mm fan to cool the motherboard,

Ocena
5 / 5
Polubienia
60
Pobrania
223
Wydruki
1
Wyświetlenia
2440
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Reduced the number of fan mounting points and lowered the fan position to better make us of the back panel opening. 

For a 60x25mm (6025) fan, I used the Notura NF-A6x25 PWN 4 wire  (don't use the Low Noise Adaptor as the fan sometimes does not start). This is now silent with good flow. Use the sticky pads from the old fan to secure the bracket to the top of the chute. I recommend putting the fan in place first then sliding in the bracket. PETG. 

 

STOCK     ===    NOCTUA

black           →       YELLOW

DarkGrey    →      BLACK

grey             →      GREEN 

white           →      BLUE

Tagi