Bambu Lab P1P/P1S/X1 motherboard 60mm fan holder 6025 NF-A6x25
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for a 60x25mm fan to cool the motherboard,
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 223
- Makes
- 1
- Views
- 2,440
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Reduced the number of fan mounting points and lowered the fan position to better make us of the back panel opening.
For a 60x25mm (6025) fan, I used the Notura NF-A6x25 PWN 4 wire (don't use the Low Noise Adaptor as the fan sometimes does not start). This is now silent with good flow. Use the sticky pads from the old fan to secure the bracket to the top of the chute. I recommend putting the fan in place first then sliding in the bracket. PETG.
STOCK === NOCTUA
black → YELLOW
DarkGrey → BLACK
grey → GREEN
white → BLUE