ATX motherboard test stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to raise motherboard from the work surface while testing
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 204
- Wydruki
- 0
- Wyświetlenia
- 1319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I want an easy way to prevent the motherboard from touching the work surface while I'm testing/troubleshooting.
Drive an M3 screw through the center hole to use it to locate the motherboard in position. It is possible to put the rest of the screws in but I don't plan to use them, my objective is to prevent the stand from slipping away accidentally while doing testing/troubleshooting.
I might expand on this to use threaded inserts instead and attachments to hold PSU, HDD, or support heavy PCIE components like GPU.
*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s
Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)
AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DmpFxU1
*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j
For Amazon affiliate links
https://wp.me/peMLu6-2C