Ender 3 V2 External Electronics box (MeanWell PSU and Motherboard) Improved
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Revised version of my external electronics box for my Ender 3 v2 to be used with printing eclosure.
- Ocena
- 5 / 5
- Polubienia
- 281
- Pobrania
- 1351
- Wydruki
- 6
- Wyświetlenia
- 10 283
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
IMPORTANT: this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version which can be printed on the ender 3v2.
Original version
This is an improved version of my previous Ender3 v2 electronics encloser. I've moved this so that the raspberry pi 4b ethernet port and usb ports can be access from the back. I also added extensions for the SD cards that poke out the top.
The plug port, switch, and screws were all cannibalized from the Ender 3v2 itself except for the SD card holder which needed smaller screws. I used 8MM M2 self tapping screw that I already had.
SD card extensions: https://www.amazon.com/gp/product/B09CKRDFTH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I used this stand for the screen:
https://www.thingiverse.com/thing:4590024