1 / 37
Gundam: The Origin — RTX-65 GunTank Early Type (HG Scale) — zdjęcie 1
1 / 37

Gundam: The Origin — RTX-65 GunTank Early Type (HG Scale)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a High detail version of my previous 3d model of the RTX-65 Guntank from the Gundam: The Origin Manga and Anime

Ocena
0 / 5
Polubienia
13
Pobrania
44
Wydruki
0
Wyświetlenia
272
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a High detail version of my previous 3d model of the RTX-65 Guntank from the Gundam: The Origin Manga and Anime. It's designed and already scaled to be printed at the scale of a regular High Grade figure (1/144). Over the past 4 months, I’ve added detail to every visible surface of the model to improve its details, while also refining the joints and making the proportions more accurate. Just like any other gundam kit, it requires no glue or paint to assemble.

This model contains a PDF assembly guide for putting it together!

Includes the following joints: -Lower hull and torso are connected by a ball joint. -Cannons are connected to the base by a peg joint. You may either 3d print the pegs, or just use cut pieces of printer filament(1.75mm) -Shoulders can rotate 360º -Upper arm can extend about 70º away from body -elbow can rotate 360º around the upper arm. -lower arm can rotate 180º around elbow -hands can rotate 360º around lower arm

I've found that the "Cannon Connector" part can actually be replaced by a piece of 1.75mm printer filament as they are very close in size. I would recommend this, as it increases the strength of the connection.

Thank you for reading this! I hope you print my model and enjoy it! -Icewing177

Category: Models

Tagi