1 / 4
Source One v6 Radiomaster XR4 ELRS Antenna Arm Mount — zdjęcie 1
1 / 4

Source One v6 Radiomaster XR4 ELRS Antenna Arm Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Arm mounts for the XR4 dual band antennas

Ocena
0 / 5
Polubienia
6
Pobrania
61
Wydruki
0
Wyświetlenia
355
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Design Philosophy

The design philosophy behind this mount is to fulfill as many placement requirements as possible.

  1. It keeps the antenna off the carbon fiber frame to reduce interference.

  2. It allows both antennas to be placed perpendicular to each other for maximum reception. This is to ensure that only one of the antennas has its null field pointed toward the transmitter and the other is oriented to receive. Obviously, this is not 100% possible on a deadcat frame, but will be on the other Source One v6 frame.

  3. Stabilization of the longer portion of the antennas to keep them out of the way of the props.

  4. Keep the added weight minimal. These are fairly small pieces, but not too small to tear apart easily.

Printing and Placement

I used 95A TPU with 4 walls.

Due to the flexible nature of the filament it is essentially a requirement to tape the mounts to the frame to keep them from falling off. I'm definitely open to suggestions on how to secure it more cleanly.

Tagi