1 / 2
ELRS ep1 dual MOUNT FOR PT screw OR M3 screw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ELRS ep1 dual MOUNT 4 PT screw OR M3 screw there is 2 versions one for pt one for M3 the holes is 30x30
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 364
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (10)Powiązane
The holes are2.9 FOR M3 OR 1.5MM FOR PT VERSION . The distance between the holes is 30X30 mm
Please print it using TPU filament !!!!
I did in Ender 3s1 and slice it using Cura.
The design was created in Onshape."
If you have any further questions or need additional assistance, feel free to ask!
Print Settings
0.2
50MS
NO SUP