1 / 1
ELRS T Antenna Mount for 22mm Standoff Spacing — zdjęcie 1

ELRS T Antenna Mount for 22mm Standoff Spacing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A print and fold ELRS T Antenna Mount for 22mm Standoff Spacing. Fits most ELRS T Antennas

Ocena
0 / 5
Polubienia
3
Pobrania
54
Wydruki
0
Wyświetlenia
299
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a simple mount for an ELRS Antenna. It was originally designed to fit on a Speedybee Master 5 HD below a mount I also made for a DJI O3 Air Unit antenna (Linked Below), but will fit on pretty much any frame with 22mm Standoff Spacing in the rear. 

It is designed to print flat using TPU and be folded in half to enclose the antenna. A small zip tie is put through the holes to hold it together. This makes it much easier to print than something with overhangs. It has survived countless crashes with no damage to the antenna. I printed in 95A TPU with 20% Gyroid Infill and 3 Perimeters. 

Tagi