ELRS TX case cooler lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is simply a cooler looking version of ssombras Happymodel ELRS TX module case lid.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 622
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is simply a cooler looking version of ssombras Happymodel ELRS TX module case lid. The model for the case is the same as the original, except it is 2,2mm shorter, so that the lid sits flush with the radio. The space for the antenna is also limited so a little bit of play is needed to get it in place, but it definitely fits. I also had a little bit of trouble fitting the radio pins into the TX headers.
I have included the .f3d file for those who have fusion360 an want to modify the design. Be warned that fusion takes a while to compute this project.
Edit 14.2.2022 : I made a thiner version, with holes to improve cooling (v2). The .f3d file is not updated
I printed in AzureFilm marble and black PLA, using the Cura swap filament at layer change post processing script.
The design is heavily inspired (copied) by the Evas from Evangelion
The .3mf and .stl files are the same
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
20% gyroid
Filament: AzureFilm PLA marble marble & black