GEPRC mark4 5-inch m100 gps + VTX SMA pigtail + elrs antenna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Split model to keep the vtx antenna, elrs antenna and M100 GPS organised. Printed in PLA and kept together with m3 bolt.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This model allows an M100 gps to be mounted to the back of a Mark 4 5-inch GEPRC frame with also an SMA antenna pigtail and the elrs antenna. It also leaves space for the battery cable to pop out.
Printed in PLA with 15% infill split in half, to be held together with an M3 bolt and M3 nut.
The model could use a little improvement but it works very well as it is.
Modeled with OnShape, if you want to fix it or change it it's at https://cad.onshape.com/documents/0a009ddea8fdb9e12eb06f6a/w/812b3fba4e9ffaf0a7ce8869/e/2e05bb46737393fad02cb027?renderMode=0&uiState=699856017372a3506ad768d0
