GEPRC mark4 5-inch m100 gps + VTX SMA pigtail + elrs antenna
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Split model to keep the vtx antenna, elrs antenna and M100 GPS organised. Printed in PLA and kept together with m3 bolt.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 67
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
This model allows an M100 gps to be mounted to the back of a Mark 4 5-inch GEPRC frame with also an SMA antenna pigtail and the elrs antenna. It also leaves space for the battery cable to pop out.
Printed in PLA with 15% infill split in half, to be held together with an M3 bolt and M3 nut.
The model could use a little improvement but it works very well as it is.
Modeled with OnShape, if you want to fix it or change it it's at https://cad.onshape.com/documents/0a009ddea8fdb9e12eb06f6a/w/812b3fba4e9ffaf0a7ce8869/e/2e05bb46737393fad02cb027?renderMode=0&uiState=699856017372a3506ad768d0
