Counting matching models…
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
I've created this simple model to mount the “Tuya ZY-M100 Human Presence Sensor” that I got recently to stand upright on my desk, instead of mounting it on the wall. I've created the side-ways version which allows it to be low profile but…
I needed to rework and mount as much of my networking gear as i could which necessitated removing the modem's stand and constructing a wall mounted solution. The most important goal for me was to make the simplest print i could while not…
A simple mount for the HGLRC M100 GPS module. Versions: - Plain - Flightory Mini Plank Hatch fitted
I decided to make some replacement panels for my Centaurus M100 to give it some character. I made a blank and some customized panels. Feel free to remix it with any design you want. The cutout with the design should be 0.4mm deep if it…
Sensors just clips in. Screws to a wall or ceiling with just one 3mm screw. Prints without supports. Freecad file included with parameters for sensor size. Different case sizes exist! Tuya_ZY-M100_Wallmount_small for sensor with a…
GPS mount for FlyFish Volador VX5 for the original antenna mount, compatible with all GPS units with dimensions of 21x21mm. No screws are required to mount the module. Print settings: Material - TPU Infill - 50% Walls - 3
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.
HGLRC M100-5883 GPS zip tie mount for a FPV frame. This model is designed to fit securely on the top plate of the GepRC Mark4 7" drone frame. Recommended Print Settings: Material: TPU or ELASTAN (TPU 95A used in this case) Infill: 20%…
This is a bracket to replace the stock mounting bracket supplied with the value-priced Dual Electronics XCAM100 backup camera, commonly sold in major retail auto parts chains and online. This bracket utilizes the top two license plate…
Used with this sensor: https://de.aliexpress.com/item/1005004793115950.html I printed it on its back, so support is needed for the horizontal holders on the left and right.
Printed with PETG with .1 layer height. The MAG Alignment in Betaflight should be set to CW 90° in the config tab. But also confirm that the compass points the right direction in the setup tab.
i made a rack mount for my cm1000 modem, it mounts right now with zip ties in my case but you could probably stick it on with vhb tape as well. i just made it simple and didn't want it to be complicated with multiple parts. also the…
There are a few mounts around to get the M100 onto the Flywoo Explorer LR, but a lot of them have large covered portions that make me think that heat dissipation wasn't a factor in the designs. With this mount I left both the top and…
HGLRC M100-5883 M10 mount GEPRC MARK5 DC TPU
M100 Mini GPS Holder For Flyfish Volador I provided the 3mf file to make it easier to make adjustment if you need to.
Wanted to mount this guy to a board, did not like the goofy stand it came with. This would possibly work with other versions of this model.
Must be printed with TPU
I am new to printing and drones an i couldnt find a mount for the M100 from HGLRC so i made a simple one. TPU 30 % infill (maybe less but thats what i went with)
A simple model to hold your GPS module in place. Should be printed only with TPU. Works with HGLRC M100-5883 M10 GPS Insert the module through the hole on the left side, then connect the wires.
This is a TPU Mount for the HGLRC M100-5883 GPS. I made it for the ImpulseRC Apex Evo 5" but it might fit other Frames(check the Dimensions in the Drawing). The Mount still offers enough space for the Stock O3 Antenna mount. There are two…
GPS mount for HGLRC M100-5883 + Source One V6 Print in TPU. Use 0.2 mm layer height, 30% infill, tree supports ON, build plate only OFF, remove small overhangs OFF.
HGLR M100 Mini mount GEPRC MARK5 DC
This was inspired by https://www.thingiverse.com/thing:2765984 That worked OK, but I didn't like the press-fit. I designed a similar mount but with a split ring design that uses an M3x6 nut and bolt to tighten around the lens. This should…
This is Atomstack M100 Noctua Mod. Atomstack M100 is used in Atomstack S20 Pro or A20 Pro laser engraver. I can use it with zero sound. You need: 1) Fan: Noctua NF-A6x25 FLX 2) DC-DC converter 24 V → 12V: MEAN WELL SPU03N-12 Just print it…
A simple stand to maintain Box M100 Aegis Mini 2 Geek Vape No support / 20% infill
Hier haben wir einen Spoiler für den Worx Landroid. Passend für alle Größen wie M500, M700 oder M1000. Ich habe den Flügel in PLA-Orange und die Halter in schwarzem PLA gedruckt, hält schon den ganzen Sommer und verformt sich nichts. Ich…
Outer dimensions : 80.5 x 43.5 x 73 mm Inner dimensions : 73.1 x 36.1 mm Warning : check the dimensions of your power supply before printing. As you can read in the comments, Stepcraft provides different sizes of power supplies.
I made this for someone that needed one and I figured that I would upload it here to make it available for other people. It's meant to be printed in TPU. I have neither printed nor tested this myself, but the photos are from the person I…
This adapter screws on top of the Sigma 150-600 camera lens in place of the lens hood. It gives it a M100x4 male thread. The purpose is to mount filters or masks for astrophotography with this standardized interface allowing to use the…
Print upright with supports. ideally with a very thin layer height 0.14 mm or lower but if you don't want to wait, enable variable height in your slicer. the exterior finish won't be as consistent, but it will still be smooth.
Simple TPU mount. Print top facing side down to avoid overhangs and to get nice surface finish.
HGLRC M100 Mini Arm adaptor for ApexLR 7
Fits the standard GPS cutout location on the AR Wing Pro. It is a friction fit, but I recommend using a bit of glue to secure it.
Hi! This is the first design I'm uploading here. I originally didn't even plan on publishing a polished version of it but hey I guess it could help some people out there getting into the (diy) simracing hobby. The concept is simple, it's…
After a hard, exhausting day, you can no longer manage to turn the Ci3 or Ci7 M100 out of an adapter? For some reason you can't get the speaker out of the adapter? Here is help for you: the HELIX COMPOSE REMOVER. This can be placed on the…
Wall/Skadis mount to angle a ZY-M100 sensor in case the straight one is not working for your setup.
Use this to attach to a wall or to generic DIN rail mounts (available on Amzon, eBay, AliExpress etc) Has access hole for DIN rail clip release. Integral spacers keep upright when DIN rail mounted and spaced away from the wall when wall…
This power connector has been designed to fit the FM1000 series of VHF transceivers. This was a request from the Aberdeen Amateur Radio Society (www.aars.org.uk). The power connectors for these radios are very rare and hard to find, and…
This model allows an M100 gps to be mounted to the back of a Mark 4 5-inch GEPRC frame with also an SMA antenna pigtail and the elrs antenna. It also leaves space for the battery cable to pop out. Printed in PLA with 15% infill split in…
This Bahtinov mask allows for a precise focus on stars for astrophotography. It has a M100x4 female thread. The purpose is to be able to mount it on different camera lenses. To do so, one only needs an adapter between the lens (like lens…
GPS mount for the Speedybee Master 5 V2 frame, fits 15x15x5.5mm GPS modules.
Outer dimensions : Height : 80mm
Nato Strap Adapters for the Casio G-Shock AWG-M100. It has a 16mm lug and is made for 22mm wide straps
This is a gear replacement for the drive shaft assembly on a Singer M1000. it fits snug. print in ABS, or Nylon,, etc..
This part is an adapter for using a silent Noctua 60mm fan for cooling the Atomstack M100 laser-module. The part was created in the style of https://www.printables.com/de/model/275058-atomstack-m100-noctua-mod but the present version can…
This Solar filter holder allows to mount safely a solar filter on a standard camera lens. It has a M100x4 female thread. The purpose is to be able to mount it on different camera lenses. To do so, one only needs an adapter between the…
GPS Mount inspired by https://www.printables.com/model/764135-quadmula-siren-f3-gep-m10-gps This fits a HGLRC M100 Mini GPS, or any GPS with the following dimensions: Width: 1.5cm Depth: 1.5cm Height: 0.5cm
Zip tie attached hose adapter for the FX 4 Stage PCP Air Pump or the identical Gehmann M100 4-Kolben compressed air pump. The hose holder can also be mounted without a cable tie, but then it might slip. The adapter should fit all pumps…
I used a couple other folks' designs to slap together a holder for my multimeter, the Kaiweets KM100. It has space to hold the probes, as well as some alligator leads, or other things. this fits gridfinity 2x3. Thanks, and Happy Printing!
3D Printable Mount for the Mafell FM1000 on the Lowrider V4. It's rotated 45 degrees to clear the back of the Core. A Big Thanks to V1 Engineering for all the work he put into the Lowrider V4! Had to modify the Dustshoe slightly because…
Prints upright with no supports. The MM1000 or MM2025 Motorola MoCA bridge fits inside with ports facing down. It's not a super-tight fit, but the weight of the coax and ethernet cords keep the unit in the mount securely.
Mounting bracket for the Stepcraft M1000 CNC Power Supply.
Quick remix of ModernBirdFPV's M100 mount, drew inspiration from Oscar Liang's mount for the stock GPS. There is an indent for some 3M VHB Tape to keep it steady. https://www.thingiverse.com/thing:7062882
Should fit any GPS with 21x21mm profile. Does not fit the Source One V5. Printed using 95A TPU filament, 0.2mm layer height, 0.4 nozzle on a prusa mini+. Does not need supports.
I recently bought a UNI-T model LM100 laser distance meter. Unfortunately, this meter is not equipped with a thread for fixing it to a tripod. So I designed a suitable holder with 1/4" UNC thread which allows you to mount this meter on…
Калібр Rama APEX 5 для GPS HGLRC 100pro
Based on [RS-CNC] Mafell FM1000 by ChuckZombie on Thingiverse. For some reason, my MAFELL FM1000 didn't fit in the original design. I hadn't realized it before but the tool was not "sitting flat" on the 43mm collet, as there was not…
You can mount gps either way - there is a dedicated hole for gps wires. V2: further improvements
Screw it.. there is no rule how to screw it together. Just print out the set and combine the bits in your desired order. The multi purpose nut has besides the ordinary holes spaces for USB Sticks and Calipers. The lock nuts are made to…
Made a Cyberpunk 2077 themed smartwatch charging stand for my new Ticwris Max with LEDs. Thasnks to both for there great work i combined here for my special stand. Print Settings Rafts: No Supports: Yes Resolution: 0,2mm Category: Mobile…
https://cad.onshape.com/documents/e1a709a353eeb2cfd1fa63b1/w/fa799cc9b338fed9e3a00cc6/e/8daa9a0e339f7dee92d148f6?renderMode=0&uiState=673ef710ffd5062dd3a447a5
I wanted to place this stand on a table top. I saw some other solutions but wasnt happy with it. I instead designed this as an entire case replacement. It re-uses the self tapping screws from the original enclosure. Other than that it…
The power connector was designed for FM1000 series VHF transceivers. The power connectors of these trx are very hard to get. They use standard molex-pc connectors. Printing Print using a 0.25mm nozzle. Use PETG material, it's much more…
A simple light GPS mount option for the source one V5 Frame, since most I could find were either too heavy (racer brain) or didn't have enough tilt (like seriously who cruises at 30 degrees?). Uses your standard two screw SMA mount, I…
I made this case/fender for gps module HGLRC M100 which is atached to Readytosky Johnny 5" V2 drone frame printing: infill: 80% perimeters: 3 filament: eSUN TPU 95A supports: you dont need supports!!
HGLRC M100 GPS Mount for RC Planes This is designed for flat mounting the HGLRC M100 GPS in RC planes, using double sided tape or similar. I recommend printing this in TPU. HGLRC M100 GPS Mount for RC Planes: HGLRCM100_GPSMount.stl
Printed with .8mm nozzle and Yellow PETG at 240/90 degrees. Prusa MK3+ 3mm brass heated inserts for all screws. Be sure to print the loom part so the loom is horizontal and flate on the plate. Printing the loom part in the vertical…
Stackable or wall-mounted organizers for extra chuck jaws. Models fit most jaws for VicMarc 100 chucks . I also made another version for VicMarc 120/150 chuck jaws , and a version for Nova 100mm chuck jaws . Notes: Print the mount in PETG…
mount for an M100 mini gps instead of the M1000
used to put a netgear M1000 nighthawk on the wall to improve wifi and cellular distance. holes for mounting/ ventilation
Spare button for radio control module Meta System M100RC.
a basic support for any RC fixed wing (A10 Thunderbolt II in my case)
print it in abs , you will need 4 M3 screws and 4 nuts you need to flex the part to put the gps in and then screw it in the frame
Last week I got some new filament for my little Fabrikator 2 Mini. It was the dirtiest filament I have ever seen in six years of printing. No way I will feed my printer this material without a filter. So I designed a filament guide and…
Robotická sekačka někdy nemohla vyjet do kopečka, tak jsem ji vytiskl drapáky a jede bez problémů. Nalisováno po odstranění původního vzorku.
ESRack is a very good modular rack mount system created by @EvilProphet . I created a module for Time Machines TM100A from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
AOS UL7 V5 - HGLRC M100 GPS Mount GPS Mount for the HGLRC M100 that slides over the rear standoffs. The standoff tubes are 20mm to match the one I received from IFlight, so I've included a 5mm sleeve/spacer to fill the gap if you aren't…
Supports not needed for pegboard mounts, but you may need it for the small screw hole.
Front mount for HGLRC M100 GPS (21x21), designed to sit in the GoPro position. Added a USB-C extension holder — I’m using an O4 Lite mounted on the stack, so this lets me access the port from the front without taking off the bottom plate…
In mobile use of the Gehmann M100 or the identical FX 4 Stage Air Pump, the bulky and heavy original stand is a nuisance. That's why I made a folding stand. Two simple M8x55 screws or printed bolts (56x8, glue if necessary) can be used to…
This is a replacement piece for a threaded insert that comes with 3D printed kits of the SO-ARM100, SO-ARM101, and SO-ARM101 Pro robotic arms. It's printed in the wrong orientation by default, and breaks very easily along the layer lines.…
This is a simple mount for the Autel KM100. I wanted a simple solution to mount my diagnostic tool inside of my car and this is what I came up with. I plan on making another revision adding the OBD II adapter as well to this, but for now…
I got this sewing machine from walmart to do simple repairs and it does a great job for what I need it to do, but i noticed as the spool would unwind it would try to jump of the pin, I found this model and remixed with fusion 360 to hold…
I quickly modeled a replacement knob for the toolpost release handle on a Knuth DM1000A lathe. Thread is M12-1.75. Dimensions in image. Print in your choice of oil/heat resistant materials. I printed this one in ABS+GF. We'll see how long…
This was designed for the Black and Decker mixer M100-BR. Printed in PETG No support needed Nozzle: 0.4 Layer high: 0.2 Perimeters: 3 Infill: 0 Speed: 50 mm/s
can switch gps holder. just let me know. using tpu 95A
This is a dedicated GPS mount for the HGLRC M100 GPS module , designed for the SpeedyBee Master 5 HD frame. The mount uses a 22 mm mounting hole spacing and is designed to fit directly onto the frame. Features Designed for HGLRC M100 GPS…
Lüfterhalter wird in den rahmen eingehängt man braucht min 120mm abstand zum lüfter.Waagerechtereinbau Lüsterklemmen halter für 4qmm klemmen
A replacement earcup bracket and cover for the Studiospares M1000/M2000 MK1s. Printing I have had mine MJF printed in PA12 but tested in FDM PLA and it also worked fine. Hardware Needed (Each) M3x10 button head M3 nut
Darwin Baby Ape HGLRC M100 Mini Holder Halter Kabelführung unterhalb. TPU empfohlen
The HELIX Ci3 M100 loudspeakers fit into the door of the Porsche 987. However the chassis has mounting positions, that can be mounted in two directions. In the original position, the loudspeakers sit on the screw holes only - the chassis…
Replacement part for Oreck STEAM100 : Steam Adjustment Knob Product Code: ORE-53682-01
To give space between GPS antenna and FC/VTX I added this GPS mount to the original antenna mount.
Printed with PETG with .1 layer height. The MAG Alignment in Betaflight should be set to CW 90° in the config tab. But also confirm that the compass points the right direction in the setup tab.
Quick remix of ModernBirdFPV's M100 mount, drew inspiration from Oscar Liang's mount for the stock GPS. There is an indent for some 3M VHB Tape to keep it steady. https://www.thingiverse.com/thing:7062882
