1 / 3
AOS UL7 V5 - HGLRC M100 GPS Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
GPS Mount for the HGLRC M100 that slides over the rear standoffs.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
AOS UL7 V5 - HGLRC M100 GPS Mount
GPS Mount for the HGLRC M100 that slides over the rear standoffs.
The standoff tubes are 20mm to match the one I received from IFlight, so I've included a 5mm sleeve/spacer to fill the gap if you aren't using the Immortal T antenna mount. The angle also matches the one sent from IFlight - 30 degrees.
I recommend printing this in TPU and in the orientation shown in the third picture, as the GPS holder extends below the standoff tubes.
GPS Mount: AOSUL7V5_GPSMount.stl
Sleeve/Spacer: AOSUL7V5_GPSMountSleeveSpacer.stl