Standoff Mount for T-Style ELRS Antennas (eg: Rekon 10 Pro)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical T-antenna mount, fits Radiomaster 900MHz antenna, standoff-mounted, lightweight, and secure.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This custom TPU mount is designed for a vertical T-style antenna and attaches directly to a standoff on your FPV drone. While it was designed specifically for the Rekon 10 Pro frame, it may also work with other FPV drones that use similar standoff configurations. The mount is built to fit the Radiomaster 900MHz T-style Antenna, available here:
By default, the mount fits on the starboard (right) side of the drone, but you can mirror the STL file to attach it to the port (left) side. The mount secures the antenna with a single zip tie for a clean and efficient setup.
Use “ma_rekon_10_vertical_t_antenna_standoff_wide_mount” for when using large batteries that consume space on the battery bed such as the “iFlight 8000 mah Fullsend” battery
Check out my YouTube video showcasing a build using this part:
https://youtu.be/CxsEEGlc1K0
![]()
Key Features:
- Designed for the Rekon 10 Pro: Specifically made for the Rekon 10 Pro frame but adaptable to other FPV drones.
- Optimized Signal Performance: Keeps the 900MHz antenna vertical for maximum reception.
- Standoff-Based Design: Mounts directly onto a standoff, ensuring stability and easy installation.
- Flexible Placement: Default design fits the starboard side, with the option to mirror for port-side mounting.
- Efficient and Lightweight: Uses a single zip tie for secure and minimalist mounting.
Printing Specifications:
- Material: TPU
- Infill: 100%
- Supports: Required
- Printing Orientation: Print the model upside down as it is already oriented in the STL file for optimal results.
Compatible Antenna:
This mount was designed to fit the Radiomaster 900MHz T-Style Antenna, ideal for ELRS or other long-range systems.
Purchase here
Installation Steps:
- Prepare the TPU Mount:
- Ensure the TPU mount is printed in TPU with supports and oriented upside down as provided in the STL file.
- If needed for the opposite side (port), mirror the 3D object before printing.
- Attach the Mount to the Standoff:
- Slide the hoop of the TPU mount over the starboard-side standoff of your drone’s frame.
- Ensure it is seated firmly against the standoff and does not interfere with nearby components.
- Secure the Antenna:
- Insert the Radiomaster 900MHz T-style Antenna into the vertical slot of the TPU mount, keeping it in a straight vertical position for optimal signal performance.
- Loop a single zip tie through the designated hole in the mount and tighten it around the antenna to hold it securely in place.
- Trim Excess Zip Tie:
- Use scissors or a cutting tool to trim the excess end of the zip tie.
- Ensure there are no sharp edges that could interfere with flight or handling.
Reference Photo:
[See reference photo for the mounted position and zip tie configuration]
Notes:
- This mount was specifically designed for the Rekon 10 Pro frame but may also be compatible with other FPV drones that use similar standoff configurations.
- Supports are required for this print due to the overhangs. Printing the model upside down ensures the best print quality.
- Double-check the antenna’s vertical alignment for optimal signal reception.
- Verify that the mount and zip tie are secure to prevent shifting during flight.
Watch It in Action:
Check out my YouTube video showcasing a build using this part:
https://youtu.be/CxsEEGlc1K0
Support:
Have questions or need assistance? Drop your comment on my youtube video, and I’ll be happy to help!