1 / 3
N connector antenna adapter to 20mm PVC conduit — zdjęcie 1
1 / 3

N connector antenna adapter to 20mm PVC conduit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple adapter for self made antennas

Ocena
0 / 5
Polubienia
4
Pobrania
20
Wydruki
0
Wyświetlenia
118
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

A simple adapter which fits a male N-connector (or Type-N connector) and a 20 mm PVC conduit. 

I use it for making Meshtastic antennas, one of them can be seen installed on a solar node.

Easy to use:

  1. Print in PETG, completely solid, wide side bottom, with supports

  2. Crimp the cable (I use RG402 coax without insulation and solder it to the connector)

  3. Put a lot super glue gel in the printed part, let it dry

  4. Fill the small gap with liquid super glue, let it dry

  5. Fill some more liquid super glue on top of it, let it try   

20 mm caps for the PVC conduit can be found here: https://www.printables.com/model/1419413-pvc-conduit-antenna-caps

Tagi