1 / 3
N connector antenna adapter to 20mm PVC conduit — image 1
1 / 3

N connector antenna adapter to 20mm PVC conduit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple adapter for self made antennas

Rating
0 / 5
Likes
4
Downloads
20
Makes
0
Views
118
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

A simple adapter which fits a male N-connector (or Type-N connector) and a 20 mm PVC conduit. 

I use it for making Meshtastic antennas, one of them can be seen installed on a solar node.

Easy to use:

  1. Print in PETG, completely solid, wide side bottom, with supports

  2. Crimp the cable (I use RG402 coax without insulation and solder it to the connector)

  3. Put a lot super glue gel in the printed part, let it dry

  4. Fill the small gap with liquid super glue, let it dry

  5. Fill some more liquid super glue on top of it, let it try   

20 mm caps for the PVC conduit can be found here: https://www.printables.com/model/1419413-pvc-conduit-antenna-caps

Tags