1 / 4
Antenna support for Axial SCX10 Jeep Cj7
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simply collar to hold a zip tie-antenna
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
simply collar to hold a zip tie-antenna.
print, then open the collar carefully and place it on rollbar, insert the m3 screw in the thinner side (hole m3) and screw in the thick part (hole 2.6mm)... leave some room for the zip tie,insert the zip tie, then thigh the screw.
u need an M3x8mm screw and a 1.9/2 x 1mm zip tie, cut the zip tie locker and insert in the collar, then tight the screw.
easy, cheap, nice look.
