ONE PIECE VENTILATED COVER FOR HYPERPIXEL DUAL FAN WITH RP-4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was facing a big issue with Raspberry Pi-4 heating. One piece ventilated design with dual fan, four heat sink.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 2
- Wyświetlenia
- 1296
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I was facing a big issue with Raspberry Pi-4 heating while printing PETG or ABS because all other available designs integrated with main LCD are close to the bed, so I decided to design this one piece ventilated design with dual fan, four heat sink.
No hardware required to install all equipment inside the cover, only two M3 x 10mm screws are required to assemble cover with bracket.
Amazon link for dual Fan & heatsinks:
https://www.amazon.com/gp/product/B0888V7RLC/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Hyperpixel Touch Display link:
https://www.pishop.us/product/hyperpixel-4-0-hi-res-display-for-raspberry-pi-touch/
https://www.amazon.com/dp/B07HJ4NJ3Z?tag=amz-mkt-chr-us-20&ascsubtag=1ba00-01000-org00-win10-other-nomod-us000-pcomp-feature-scomp&ref=aa_scomp