Elegoo Saturn 2 Build Plate Drip Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Cryptothornton design. I've made a bunch of changes.
- Ocena
- 4,737 / 5
- Polubienia
- 144
- Pobrania
- 1673
- Wydruki
- 18
- Wyświetlenia
- 5368
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Cryptothornton design. I've made a bunch of changes. I've tampered the hole that mount it to the unit so that it has a tighter fit on the arm and beefed it up to make it stronger. I also lengthened the arm so that it hangs closer to the left side of the vat and I've lengthened the arm that the plate hangs from to center over the vat better.
Update, it has come to my attention that not all Saturn 2s are the same I’ve added 2 picture showing the difference between an early model and a later model. This will only fit the later models where the build plate arm mounts flush to the Z axis plate. If you have an early model you‘ll want to use Cryptothornton design which I have linked below.