Elegoo Saturn 2 Build Plate Drip Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of Cryptothornton design. I've made a bunch of changes.
- Rating
- 4.737 / 5
- Likes
- 144
- Downloads
- 1,674
- Makes
- 18
- Views
- 5,373
- Reviews
- 19
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Cryptothornton design. I've made a bunch of changes. I've tampered the hole that mount it to the unit so that it has a tighter fit on the arm and beefed it up to make it stronger. I also lengthened the arm so that it hangs closer to the left side of the vat and I've lengthened the arm that the plate hangs from to center over the vat better.
Update, it has come to my attention that not all Saturn 2s are the same I’ve added 2 picture showing the difference between an early model and a later model. This will only fit the later models where the build plate arm mounts flush to the Z axis plate. If you have an early model you‘ll want to use Cryptothornton design which I have linked below.