Counting matching models…
These are parts to make a ventilation system, you just need an 80mm pc fan (I use a phone charger to run it), 80mm diameter ventilation pipe and some hex-nuts and bolts for it. I use it for my elegoo saturn but also for my fdm printing…
3D printed spacer to be used with the Robot_Retro Sega Saturn power supply. v2 version with a slightly shorter model to make it compatible with shorter USBC cables robot_retro store Designed by Joseph Tomkins
Turntable (lazy susan) that can be used either for storage (e.g. organizing stuff in kitchen cabinets) or for other purposes (e.g. painting models). This remix uses a bracket with double the wheels, so that the top plate does not bend or…
Heyho Yesturday I came up with the desire to create my own turn table xD So here it is! Features Strong : I designed this Table to hold quite some weights. The main tolerance/ wiggling will be due to the bearing itself. In my tests I…
Hello 3d printers! I made a remix of a holder for Dolce Gusto cups which is also turnable/spinnable/rotable to get your favorite coffee cup within hand reach! It has storage for 3 x 6 (18) cups! Easy to get the cups out the dispenser and…
I had a very inaccessible ¼ turn shut off valve on a water tank which I couldn't grip properly to operate. I originally made a longer replacement for the handle but the PLA wasn't strong enough and the cut out just tore loose. So I made a…
Since some people noted that it can be difficult to break free some of my gear rings and that the one with inside knurling can be uncomfortably rough (matter of taste), I made another variant with a smooth inside, but with two grooves for…
Ensure you add a pause in the G-code at the right layer! Ensure you add a pause in the G-code at the layer you intend to switch the filament to another color.
Ensure you add a pause in the G-code at the right layer! Ensure you add a pause in the G-code at the layer you intend to switch the filament to another color.
This model turn a normal potentiometer into multi-turn potentiometer, because some time you want to make an enclosure for a board that come with trimpot, but adjusting trimpot is a pain and multi-turn potentiometers are expensive. Re-use…
Print with PLA or PETG, only 1mm of clearance so warping could prevent fitment. Update: Redesigned for 5x3mm neodymium magnets, just glue them in place (they have to sit flush with the contacting are). 5x1mm magnets weren't strong enough……
Planetová převodovka 1 : 136. Ložiska 4ks 608, 2ks 6802, hlazená kulatina pr. 8, 1ks červík M5 x 6, šroub se zapuštěnou hlavou 4ks M3 x 16, 4ks imbus M4 x 20, 4ks matice M4. Zájemcům mohu poslat model ve FreeCADu.…
🔧 Printing Recommendations: Material : PLA (recommended: PLA AIR) Perimeter Walls : 2 Infill : 15% Supports : Support from build plate only (mostly not needed) 📦 Features: Modular, stackable design (see exploded view) Lightweight yet…
This fabulous chicken can be stuck to your car window. Go down to make it jump, and vice versa!
The Recreator3D.com –MK6 : FUN SIZE - a KB-3D.com Build Kit Experience - Turning PET1 Bottles into Filament! BUY A KIT HERE!!! 🚀 KB-3D's Impact on the MK6 Kits Since 3DPrintopia 2024 , KB-3D has helped take the Recreator3D MK6 from a DIY…
It is a character with a person's feet and a cow's head onSaturn's body. It appears at the festival site, and every time it takes a step, it looks like a dance move and makes people enjoy it. It is a really strong player who owns the…
Garmin changed how the RCT715 attaches to a bike compared to the RTL series. It's more durable, but isn't compatible with many of the numerous third party mounts on the market and even on this site. This puck fits on many of those mounts…
I designed a dust extractor for my lathe, which attaches to the hand rest via a rod. This allows the dust to be extracted precisely where it is generated during sanding. The connection fits standard 100mm dust extraction hoses. I printed…
Updates: 2026-03-31 Added step of PCB mockup (Luke's USB Cam.step) 2025-06-27 Added center hole to extrusion mount for potential pivot joint on a secondary mount, renamed it to Hinge Mount When I got my camera module, I noticed that the…
A mount for the Nocturne camera from Luke's Lab. It is tight, and you'll have to turn your camera on its side and maybe push down 1 of the IR emitters, but it provides a pretty good view of the entire build space and toolhead. Designed…
Saturn V Rocket Printable Board Game Scale Space Race Micro Miniature
**********UPDATE 8/19/25***************** I just added the Power Bank files below. I forgot to upload them the first time. Sorry. If you already downloaded the files, just get the files in the Power Bank folder.…
I wanted a drip bracket integrated into my build plate so that I didn't have to hold the dripping build plate with one hand and try installing the bracket with the other, but the double sided ones that I found didn't have clearance for…
Description CATCH THE BEES & AVOID THE WASP This can be a game for 3 people or it can simply be a toy for kid or for an adult (it's for everyone). This design also is with turning mechanism. Both middle and honeypots with bees are…
Like most, I wanted a handle on my Saturn 4 Ultra 16k and I didn't really want to drill a hole or have double sided tape, so I designed a simple halde that just clips onto the lid. Installation: I found it easiest to start clipping in the…
Three simple yet effective turn knobs for M5 hardware: countersunk bolt, hex bolt and double nylock nut. The tri-wing design allows for a good grip and high strength. After printing, insert a nylock M5 nut into the bottom cavity (use…
Vihtan Kuura door handle return mechanism. Printed in PLA at 0.08mm layer height and 200-300mm/s speed. 35% gyroid infill, 2 walls, 4 top layer and 4 bottom layer. I didnt add supports, but it could be a little bit prettier with them.…
I made some modifications: Added shorter double-sided version, tracks on both sides. Added shorter version double female connector. Changed connectors as in .pdf file just to be sure (fits Smuk3D's files) Print Settings Printer: Print…
The 2nd and third stages of the Saturn V had the LH2 supply lines go around the LOX tank and are visible between the skirt and the J2 engines. The attached STL files were printed using a Creality Halot Mage resin printer as the detail is…
This is a remix of InsaneDruid's Sega Saturn Rhea/Phoebe Cover, but made for a micro SD "Micro SD Card Extension Cable PinQiongZhe" in a Sega Saturn VA0 model MK-8000. https://www.amazon.com/dp/B0D116KQZZ Print the main file of your…
Technics Miniature Collection in the style of a dj setup, so I made this simple platform with angled supports
This model is compatible with the lego system.
Welcome to the turning drag chain gantry connection tower. It is the best way to give the cable freedom in turning by a moving toolhead. So check out the pictures and if you like it → build it!
You think just turning a knob is not enough? This Push‑to‑Turn spiral knob turns your regular rotary knob into a big, satisfying push button. Press it down, it drops, it spins, and you slam the volume up in one move. This new way of using…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper STL Files for the Nerf Rival Saturn Stock Extension. Adds the extra length to the…
Plans for the antenna can be found here: https://www.hamuniverse.com/wonderbar.html I used #14 insulated common household wiring for the coil and #16 hook-up wire for the "bowtie" part and the 2-turn coupling loop. The bowtie shape I made…
These are some pieces that should be compatible with both TRENCITY (Argentinian counterpart) and BRIO train sets. I've always wanted more parts so i could let my creativity run wild. I used trencity measurements but the parts should be…
The turntable model published by @DIVO3D_2177560 required a rather expensive bearing that didn't really seem necessary for overall functionality, so I made a printable version that costs pennies and only requires 6mm bearings and 6x3…
NOTICES (herunterscrollen für deutsche Version / scroll down for German language version) Non-commercial provision of a single construction file in STL-format for an adaptor for a frame-like aftermarket rear turn-signal holder for Yamaha…
Background I loved the idea of the aquapurr cat fountain as you do not have to clean it and the water never runs out and is always fresh. But it was a bit of a journey to get my cats to use it so I wanted to share the solution that…
Turntable jig setup to allow for rotating photography, photogammetry, scanning and video of small items. The jig holds in place a 13.5cm diameter turntable (purchase on Amazon) and works in conjunction with the Iphone 16 Pro Max clicgear…
This is a hack for using AON3D M2+ style dryboxes that were originally designed for vertical hang mounting (don't ask...) With a slight offset too their central post you couldn't use them any other way until now! Behold! Now with just two…
non-return flap for dust container
A simple model to raise your decks 80mm up from the table surface. Perfect fit and really sturdy. Simple perfection.
Another Garmin bracket, this time with mountain bikes in mind. The clamp can be printed in place, with no supports necessary. The interface itself is in several parts, to improve durability and make it easier to print, again without…
There are loads of Garmin interfaces out there, but (in my opinion) they all fail for one of two reasons: the intended print orientation is horizontal, thus mandating support structures that are difficult to remove and leave residual…
Hierbei handelt es sich um eine Halterung für einen Aerial- / Turn- oder auch Akrobatik-Ring. Die beiden Halterungen werden im Abstand von ca. 15cm nebeneinander montiert. Sie sind so geformt, dass sie den Ring perfekt mit dem…
This is not an elaborate model, I designed it for a little boy I know who enjoys mowers. He enjoys it, that's all that matters. The model is printed as one piece. The wheels and swivels are functional after a print, though might be a…
A simple 3D-scanning turntable designed for makers, designers, and anyone capturing models for 3D printing. The base uses four 608 bearings for smooth, stable rotation, and the top plate sits securly on the bearings for easy spinning.…
This turntable decoration is designed as a rotating weight placed directly on a vinyl record, similar to a classic record weight. As the record spins, the model rotates smoothly together with it, creating a captivating visual experience.…
# Denon DP-900M / Pioneer PL-PM2000 - Dust Cover Hinges Replacement hinges for turntable dust covers. The original plastic hinges are known to break after 25+ years of use. Why This Model? - Many of these used turntables are sold with…
This turntable decoration is designed as a rotating piece placed directly on a vinyl record, similar to a classic record weight. As the record spins, the model rotates smoothly together with it, creating a calm and charming visual effect.…
This turntable decoration is designed as a rotating object placed directly on a vinyl record, similar to a classic record weight. As the record spins, the model rotates smoothly together with it, creating a striking kinetic effect. The…
Remixed the great design by PrintedForFun to orient the storage bins so they fit when the turntable is right side up. Also changed the magnet size to 6x3 and the design to be press-fit vs. glued. The step file is included if you need to…
Here's one for the Audiophiles out there! A Turntable which holds up to 4 coasters in the shape of vinyl records Coasters are 10cm diameter printed in 1 piece with a hole in the middle to fit onto the turntable Mixer is made by myself…
The part should fit most Garmin devices with a 26 mm band, but has only been tested on a Fenix 7x and Fortrex 801. I originally designed this part to fit a Fortrex 801 on my Fatbike for winter adventures. There were numerous iterations…
Easy way to align your nocks to the right position for maximum accuracy. If you hit your own arrows as a consequence, you also might need a suiting nock extractor at some point. Also check out the Ultimate Archery Companion . Printing is…
Trade in your plastic pots in favor of soil blocks! I love my Ladbrooke soil blocker but I needed a few more when having helpers get ready for planting. This design features the use of heat inserts and springs to create a durable and easy…
I found printing it on it's side gives the best stability for actual use. UPDATE: V3 works but knob was too close to housing, V4 fixes that.
a basic knob replacement for appliances that have a D-shaft to rotate between different modes recommended 100% infill and to be printed sideways with all the lines being arranged lengthwise
Prints in place without supports. I printed mine with PETG, but if you use something like PLA you can probably tighten up the tolerances.
Video: Standoffs: Currently needs 320mm bed space. STEP file included if anyone wants to modify for smaller printers, its not something I will have time for any time soon sorry. A large turntable that uses my "Fixit" fixturing system.…
A common problem is stripping of the threads on the resin tank mounting insert. A fused insert with an M4 thread is required. 4 perimeters 100% PETG
This cover goes over the door’s thumbturn lock to prevent small children from twisting it and locking or unlocking the door. Adults can still operate the lock easily, but little hands can’t get a grip. Easy to print and can be attached…
Change the colors to match your favorite teams. 🚨 WANT TO SELL MY 3D PRINTS? Join my $2/month Buy me a coffee membership and start making money with my models!
A replacement 1/4 turn kitchen tap handle, secured with a 20mm M4 nut and bolt
The coolant return hose did brake when we did an repair on an customers Ford kuga 2015 mod. I have printet the part and did try to mount it, it needed som smal changes. Before i could test the new one we got the new hose that we mounted…
Send your Love letters through stereo with this beautiful Valentines Day themed Turntable and Heart-shaped Vinyl! Valentines Day Competition 02.08.2026 - Gunnar Davis. p.s. This model was created specifically for the sake of display and…
Design Concept The 3D Scanning Turntable is designed to hold objects securely for accurate 3D scanning. Its simple yet effective design allows for a smooth 360-degree rotation, making it suitable for various scanning applications. The…
cool saturn that is really fun to spin. made on tinkercad. sorry i do not have good photos
Turn Around Strategy Game for dogs and cats Print: 1x Stand 2x Support 1x Axis 2x Container 1x Lid 1 (or 2x Lid 1) 1x Lid 2 (or 2x Lid 2) 3x Distance piece additional Parts required: 2x Washer 10x20x1.5 2x Retaining Ring DIN471 10mm Print…
A hook designed to attach to the edge of an open flight case, providing a convenient spot to hang DJ headphones while using your turntable. Perfect for DJs, audio technicians, or anyone looking to keep their workspace organized. Fits a…
PETG 3-4 perimeters without supports 15% infill
Suitable for an SV 650 (2016-20xx) turn indicator base, i used a CHAFT Aftermarket indicator with an M8 thread the idea is to take in sandwich the steel plate holding the serial turn indicator with the two printed parts increase the space…
Design Concept The Saturn Rings planter draws inspiration from the magnificent rings of Saturn, capturing their mesmerizing beauty in a finely detailed 3D printed design. Function It is intended to serve as a decorative planter, ideal for…
Controller Stand for Various Consoles - NES - Sega Master System - Sega Saturn - PC Engine
I made this because my clutch petal broke and they don't make the clip so I made it myself. Do about 20% infill and hexagon infill and my printer can't do the final one and I made it strait because I have the Adventurer 5M printer and…
Installing panniers rack on the Himalayan 411 often require to relocate the rear turn indicators for both visibility concerns and/or space optimization. The rack I bought from Givi didn't came with covers for the holes left after…
I needed a way to turn a handle and drop down a photography backdrop from the cieling. I came across LarsRb's Gearbox and though it would be perfect... with some work. The axles were way to thin to do any work, and their handle would be…
This gear is the one right before the largest gear with the + on it. The top teeth commonly chip on the original, this is a perfect replacement for the original, you may have to do some scraping of the teeth with a razor blade to clear…
this is a simple hopefully water proof container that can fit matches and so much more
Shifter paddles for the excellent AMG GT3 steering wheel project by Turn Racing https://www.printables.com/model/337686-turn-amg-gt3-diy-sim-racing-wheel This includes the Up and Down text as a two colour print. There are also single…
Moulds and Moulding stand for the Turn Racing 488 Challenge Project Create moulded polyurathane moulds with these models. This includes a moulding stand which you can mount your plate and moulds to while you cast them. You'll need to…
This is a recreation of a rubber part which connects the adjustable tracking force weight to the end of the tonearm on certain Akai turntable models from the 1980's. The original rubber part is over 40 years old and is often found in a…
Moulds and Moulding stand for the Turn Racing AMG GT3 Project Create moulded polyurathane moulds with these models. This includes a moulding stand which you can mount your plate and moulds to while you cast them. You'll need to attach the…
I wanted a slightly larger turntable plate for the Dual-Axis scanner included in my RevoPoint MetroY Pro kit ( https://amzn.to/4qK292l ). The turntable is the one in this listing -> https://amzn.to/4tOGvfM - out of the box, it features a…
I print the screwdriver with PETG 0.2 mm layer 0.4 mm nozzle
I recommend painting the numbers with a strongly contrasting paint. I recommend printing these such that the numbers are upside down. For more markers, paint in another color of paint (PCs vs Monsters) on the opposite side of the part…
This is a way of cutting On3 and On30 switch ties to length for a #6 turnout quickly and for multiple turnouts. If you need a different number or gauge let me know and I can produce a jig for you. I used the Fast Tracks turnout…
Saw some other quarter-turn mounts that claimed to be printable, but they still required support material. This one needs no support for most printers at <=0.1mm layer height (or whichever layer height recommends 15deg overhang or less).
A remix of mkwpros124's adapter that I modified to integrate the plate. Printed with Overture transparent PETG and used Rygar1432's "How To Print Glass" settings to make the print as transparent as possible for good light refraction :…
This item is for drilling a 2 inch hole into a board and holding multiple size chisels for woodturning enthusiasts.
