iPhone 12/13 Sunshade Hood for DJI Controller (and others)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sun shade for iphone designed to work with DJI Mavic Air 2 controller.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 145
- Wydruki
- 2
- Wyświetlenia
- 1029
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Sun shade designed for iPhone 12 (and others when scaled - see note below). It provides better visibility in direct sunlight. As seen on pictures I tried both PETG and TPU materials. I think that TPU is better as it fits the phone nicely, fits into a bag easily and completely blocks light. PETG is good too BUT make sure that you have non transparent material. I tried to paint inside black but that is still not a 100% blocker for light.
No special printing instructions. Prints quickly, no supports needed except those build into the model. They are super easy to remove. Looks OK even 0.4 layer height.
Initial goal was to use it with DJI Mavic Air 2 controller but I think it will work well in other use-cases too.
NOTE: dimensions are set by default for iPhone in a case. My phone “wears” Spigen case - total dimensions 75,3x150,5mm. Please test the dimensions of your phone with or without a case and scale accordingly.