P
PrintablesJankovrto
3d printed bolts for DJI action 3/4/5 case
Just the bolts not the actual box for the camera.
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
Wyniki wyszukiwania: dji
Liczymy pasujące modele…
P
Printables
DJI RC2 Phone Holder (MagSafe/PixelSnap)
I have a DJI RC2 controller for my drone, but I wanted to mount my phone on the bottom so I could track the air traffic through an app called Flightradar24 . My phone has PixelSnap so I bought one of those holders to attach it to the RC2.…
P
Printables
DJI Osmo Action 4 Lens cap
Remixed DJI Action 4 lens cap with an "anti-scratch gap" between the lens and cover.
P
Printables
Holder/Adapter for DJI Mic 2 with Action Cam Mount Compatibility
This holder/adapter is designed to provide a secure and versatile way to mount your DJI Mic 2 to a wide range of action cam accessories, including the DJI selfie stick. The model can be printed as oriented for best stability. Supports…
P
Printables
QUADMULA Djinn F25 SP
3D print file for QUADMULA Djinn F25 SP *The parts of Djinn F25 SP and Djinn F25 Split are completely incompatible. TPU BlackishGreen - Link
P
Printables
DJI Osmo Action 4 Battery Case Gridfinity.
Gridfinity bin for your Osmo action 4 battery case and spare lens cover.
P
Printables
DJI O4 friendly canopy
Many toothpick canopies for a 14mm camera are not suited to the up front bulk of the o4 (lite) camera so I designed this canopy to work with my o4 mount ( https://www.printables.com/model/1147195-dji-o4-lite-14mm-camera-mount ) providing…
P
Printables
DJI 04 Air Unit Pro Camera Holder for Nazgul Evoque
A mount for the camera of the DJI 04 Air Unit Pro. I recommend to use TPU filament. I haven't tried to print the model in PLA, but feel free to try it out and see if it works. Let me know if it works! I also made a Holder for the antennas…
P
Printables
DJI 04 Air Unit Pro Antenna Holder for Nazgul Evoque
A mount for the antennas of the DJI 04 Air Unit Pro. I recommend using TPU filament. I haven't tried to print the model in PLA, but feel free to try it out and see if it works. Let me know if it works! I also made a Holder for the camera…
P
Printables
DJI Avata Battery Charging Dock Remixed
No supports required. No assembly. Just Print slide in the charger and the use. Hope you like my remix.
P
Printables
DJI O4 air unit dummy model
A simplified model, with the height of the main elements for a tight fit in the canopy
P
Printables
DJI Matrice 30(T) Flarm Aurora Adapter
Standard FLARM aurora mount is glued onto the drone. This adapter to mount FLARM Aurora to DJI Matrice 30(T) using the E-Port/PSDK without glues to allow for removal. M3 (to drone) and M2 (to aurora adapter) screws are required.
P
Printables
DJI Mic Mini magent mount on helmet strap
Build of material: 12mmx12mmx3mm N52 magnet Pause on layer 70, insert the magnet then resume. (please see my ocraslicer 3mf file)
P
Printables
DJI Osmo Pocket 3 Magnetic Base with Multipoint Rail
This is a magnetic holder for the DJI OSMO Pocket 3 gimbal camera. I started out with Chrizzl's design , but as I did not have any square magnets in stock I decided to modify his design. I therefore changed the bottom to take ten 8x3…
P
Printables
DJI Osmo Pocket 3 Multiboard Webcam Holder
This is a Multiboard remix of martin.zellner 's webcam holder for the DJI OSMO Pocket 3 gimbal camera . Martin's design attaches to an IKEA Skådis peg board, where I instead have updated it for Multiboard. Use standard Multiboard…
P
Printables
DJI Goggles Integra Patent Art
DJI Goggles Integra Patent Art Certain images within this model are derived from illustrations featured in the official DJI manual. All rights pertaining to these images are vested in DJI. This endeavor constitutes an unofficial fan…
P
Printables
dji remote phone mount adapter
i printed it at 8% infill out of pla. put a little hot glue on phone seat for grip. will hold a phone up to 12mm thick and 200mm wide. new v2 model with rounded echis for easier printing and comfort
P
Printables
Dji Neo case
A case for dji Neo drone , I have upadated the model adding a 6x3 mm magnet slot and a ring to attach a carabiner or a lanyard, printed in PETG 0.2 mm height ,add support to print the ring .
P
Printables
DJI Mini 2, 2SE, 4K case
Small sturdy travel case for the DJI mini. Holds the drone, and remote tightly. Tested with the DJI mini 4k, but should also fit the mini 2, and mini 2SE. Ideal for travel. Can be printed without supports, print with 5-10% infill.
P
Printables
Protective Cover for DJI LiDAR Focus Pro Unit
Since the LiDAR Unit doesnt come with a Cover for protection when mounted on a Rig, i decided to design this one for it. No extra fastening, sits firm Spacing for foam rubber for better protection Fits when mounted on standard LiDAR…
P
Printables
DJI O4 PRO adapter for AOS 3.5 V5 with camera protection and retainer for ND filter
Fixed thickness for optimal use in aos 3.5 v5. Maybe it will work with other v5 AOS frames, but I not tested this. This adapter has fixed camera angle on 45 degrees. Added Camera protection Added ND-filter retainer. Nd-filter not dropping…
P
Printables
DJI Osmo Mobile 7P holder
All the holes are Ø8,4mm Printing: i used PLA, but recommed PETG or ASA 15% Infill - Cubic pattern 4 Perimeters Support: Only on build plate - and Brim
P
Printables
Dji Robomaster S1 Camera Protector
FR Une petite pièce pour protéger la camera, qui vient se visser avec deux vis m3 sur les inserts filetés déjà présents en dessous de la camera, c'est surement un peu fragile, mais mieux vaut casser une pièce en 3d plutôt qu'une camera…
P
Printables
Frame X Dji 04 Pro Air unit Dual Antenna Mount And XT60
Frame X Dji 04 Pro Air unit Dual Antenna Mount And XT60
P
Printables
RODE videomicro mount for dji osmo action 5
Since the original holder in cooperation with the DJI osmo camera caused the microphone to be visible in the frame, I created a new holder. Printed from PETG. layer height 0.2mm filling 20%, without supports. The holder consists of 2 parts
P
Printables
DJI Osmo Pocket / Pocket 2 PGYTECH ND filter case
The orignal case was huge for me, thats why I designed a much smaller one. As the filters are magnetic, I used 3 washers inside the model thats why the filters snap into the place. Just pause the print in a specified layer, and put in the…
P
Printables
GoFlyO4Pro - FPV Drone Frame for DJI O4 Pro - 3, 3.5, and 4 Inch / sub 250g
Das GoFlyPro Frame wurde weiterentwickelt um die DJI O4 Pro und das Walksnail Moonlight Kit einzubauen. Es werden hier nur die benötigten Dateien für die GoFlyO4Pro Drohne hochgeladen. Es ist sozusagen einfach nur ein Upgrade und baut auf…
P
Printables
Chlazení DJI Mini 4 Pro
Chlazení DJI Mini 4 Pro Při statickém provozu, pokud není dron chlazen ofukováním proudem vzduchu při letu - např. při stahování dat, nastavování nebo instalaci nového FW - dochází k poměrně značnému zahřívání. Pro původní Mini 3 Pro jsem…
P
Printables
DJI Osmo Nano: TPU Bando Case with ND Support
See it in action! Inspired by YannickFPV's great designs for the other DJI cams. Protect your Osmo Nano while smashing your quad into walls! No TPU in view in ultrawide! Supports generic ND filters, like TBS and CameraButter. Print…
P
Printables
DJI osmo nano Kayouloin case
DJI osmo nano Kayouloin case 25° Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu Free my models 6a74c3eeeb1d
P
Printables
Dino canopy for dji 04 air/lite
I needed a canopy that would protect the dji 04 air/lite for 2s or larger rigs and could take a beating. I've used it In bandos, hit concrete and steel poles and your typical tree. it really works great for toothpicks like the tunerc 3in…
P
Printables
holder dji neo
Support mural pour un Dji Neo avec ses batteries et sa télécommande. Fixation avec deux vis
P
Printables
DJI Osmo Mobile 7P Tray
This is a case that will fit the case designed by YoDesigNerd DJI Rugged Case for Osmo Mobile 7P Printed on MK3.9 with 0.4 nozzle and 0.2mm layer heights.
P
Printables
Flyfish Volador VX3 VX3.5 lollipop DJI GPS antenna mount
For the Flyfish Volador VX3 / VX3.5 Single antenna mount lollipop style I have added a mount to hold a GPS unit on the rear, This is for an 18x18 GPS unit ( Im using the TBS m10 unit) Printed in TPU 0.2 layer 15%, I have attached the 3MF…
P
Printables
DJI O3 + Lens-modded O4 TPU Frontend for the ImpulseRC Apex
Fits this housing: https://www.printables.com/model/1453676-dji-o4-o3-lens-mod-housing Still fits the O3 camera. Thanks to LorenzFPV for the alternate versions!
P
Printables
Sun Forged Djinn Monster Beast - The Eightpints The Chamuscado Glass Wastes
It's not a beast; it's a piece of the desert's own cruel soul, a ghost of the cataclysm that birthed the wastes. Its upper body is a terrifying construct of obsidian and captured sunlight, but it has no legs, just a swirling vortex of…
P
Printables
DJI o4 Air unit - Speedybee Bee25 -VTX mounting parts
By default the Bee25 does not have a way to mount the o4 air unit which is why I made these case and camera adapter pieces for. The camera adapters utilize the default DJI provided camera cover + screws. Additionally the adapter provides…
P
Printables
DJI O4 Air Unit - O3 Lens mode
DJI O4 light weight lens adapter kit. 1.6 grams. 30 Degrees.
P
Printables
DJI Osmo Action 5 Pro Mount Screw M5 (54mm)
Custom mount screw designed for DJI Osmo Action 5 Pro camera mounts. Thread: M5 Total length: 54 mm Thread length: 16 mm Printed in PETG for improved durability, heat resistance, and outdoor use. Suitable for action camera setups where…
P
Printables
DJI FPV RC3 Gimbal Protector
Gimbal protector for DJI FPV RC3. I swapped over to use longer adjustable sticks on my controller and wanted a protector that fit them. This one also has a print in place hinged clasp to lock it on. I have included files versions for the…
P
Printables
DJI FPV LED Cover
It's awesome that you can use the DJI FPV Controller in PC simulators. What's not cool is having those bright controller LEDs flashing at you the whole time. This print is probably my most over-engineered solution to a simple problem…
P
Printables
DJI Neo 2 Battery-Shaped Storage Box – Connector Protection & Accessory Case
When inserted, it protects the exposed battery connectors while also providing a convenient place to store small accessories such as ND filters, lens wipes, or an SD card. The model has been printed, tested, and fitted on real hardware,…
P
Printables
DJI O4 Pro Soft-Mount for SpeedyBee Mario5
Soft TPU camera mount for DJI O4 Pro in the SpeedyBee Mario5 frame. Keeps the stock-style mounting, but adds clearance so the M2 camera screws don’t touch the aluminum side plates , reducing vibration transfer into the camera. Note: you…
P
Printables
Prop holder DJI mini 2 with hole for battery
new remix so you can see how much battery you have while using the cover INFILL: 20% SUPPORTS: Yes
P
Printables
DJI Mic Mini Single Mic OnboardCamera Mount
available as a clip on or with the magnet. Mine was a nice press fit in, but you can glue it if needed. Added a hole to help pop it out without destructing it! Props to 荣yan for giving me a starting point, but I changed almost every…
P
Printables
Propeller Holder for DJI Mini 2 (+ Mini / Mini SE / Mini 4k) with hex grid base
Design intention This remix is just a hex mesh to the original design and slightly bigger slots to fit an elastic. My print is in TPU for environmental durability, flexibility and layer adhesion so the slots won't break as easily. Looking…
P
Printables
DJI O4 Lite antenna mount for QAV S2 JB 3" build
Building the Joshua Bardwell QAV S2 3" and the DJI O4 Lite antenna is known to be too short. This mount makes it work
P
Printables
DJI Osmo Pocket 3 Holder (for HSW)
The DJI Osmo Pocket 3 Holder (for HSW) is designed specifically to hold the DJI Osmo Pocket 3 while it is inside the official protective cover. Built for use with the Honeycomb Storage Wall (HSW) system, it provides secure, accessible,…
P
Printables
DJI Osmo 360 storage box
A box for the Osmo 360 adventure kit, with lots of clear space around the lenses so they can't get scratched. Includes space for a couple of cables, the battery box, the camera and the selfie stick. Needs a 300mm bed to print.
P
Printables
DJI Air2/Air2S mount for Multiboard
A remix of @AzJake DJI Air2/Air2S mount, modified for usage in the Multiboard system. It requires 4 raised snaps and 1 20mm small thread T-Bolt, and a M3 bolt and nut (don't remember the size). It's recommended to print a T-Bolt tool in…
P
Printables
Kayoumini 25deg Frontend for the O3 Lens Mod on the DJI O4 *Flywoo ND filters version*
You can use the flywoo o3 lite nd filters with your o3 lens mod (dji o4 lite). For 12mm standoffs / 25 degrees of tilt
P
Printables
Dji o4 with o3 lens mod canopy
lens mod: https://youtu.be/rzRayF_7Avs?si=uzwZ8htJeb8kk96V I printed the canopy with 95a tpu (you can use pla supports if you have an ams or toolchanger) I just snipped off the sagging bridges after it was done. Its recommended to glue…
P
Printables
DJI Mic 2 Mount
Hi everyone! this is an in-house designed mount for your lovely DJI Mic 2 mount. It is compatible with the standard Action camera/GoPro swivel system. I sell these as finished products on Etsy and Ebay and I use TPU filament. This…
P
Printables
DJI Mic 2 Slim Mount
Hi everyone! this is an in-house designed mount for your lovely DJI Mic 2 Slim mount. It is compatible with the standard Action camera/GoPro swivel system. I sell these as finished products on Etsy and Ebay and I use TPU filament. This…
P
Printables
DJI Mic Mini Mount
Hi everyone! this is an in-house designed mount for your lovely DJI Mic Mini mount. It is compatible with the standard Action camera/GoPro swivel system. I sell these as finished products on Etsy and Ebay and I use TPU filament. This…
P
Printables
DJI Goggles V2 Battery Holder
Rear mounted battery holder for your DJI Goggles V2 No more cumbersome battery in pocket and wire running up to your head Optional plate to prevent it from slipping off, but its pretty tight without it Plate can be screwed without inserts…
P
Printables
DJI RC2 Strap Bracket
Two point strap bracket for the RC2 controller. Didn't like existing designs which either blocked the screen or the grips, so I made this one which leaves plenty of room for your hands to rest on the controller, while using the existing…
P
Printables
HGLRC Rekon 5 Antenna Mount DJI O3/O4
Single and double antenna mount for the HGLRC Rekon 5. Should/could fit other frames with 4mm standoffs that are 12mm apart (center to center). Made it to fit a single antenna (DJI O3) as well as the double antennas of the DJI O4. Printed…
P
Printables
Deepspace Seeker5 DJI o4 Pro antenna mount
I poorly modified a friend's mount made for another quad to fit my Seeker5. Not made to work with stock XT60 setup.
P
Printables
HSKRC S5 v2 FPV Frame DJI O4 Kamerahalterung
Hallo, ich habe dieses Modell designt. Das ist eine Kamerahalterung für die DJI O4 Air Unit Pro, speziell für den Frame HSKRC S5 V2 designt. Mir hat die Firma nämlich nur die Halterung für die O3 mitgeschickt, also habe ich die Halterung…
P
Printables
Antennenhalterung für DJI O4 Air Unit Pro und HSKRC S5 V2 FPV Frame
Ich habe diese Antennenhalterung designt. Das ist eine Speziell für die DJI O4 Air Unit Pro designte Antennenhalterung die die O4 Antennen vollständig schützt. Die Halterung geht auch für andere Frames ist aber für den HSKRC S5 V2 Frame…
P
Printables
Klick Fix - Christmas Tree Stand - releaser (Odjišťovač Vánočního stromu)
Spare part - releaser of Christmas Tree Stand Example link: https://www.therange.co.uk/christmas/christmas-decorations/tree-decoration
P
Printables
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
P
Printables
lamp/dji osmo action (gopro) holder
The holder attaches to a desk or table. You can attach anything from the GoPro mounting system to it. I personally use this for a disc-shaped photo light or the DJI Osmo Action 4 camera. To print, you'll need an additional M5x20 screw…
P
Printables
DJI Mic hot shoe mount
I was needing a way to attach the DJI mic to my camera, so I made this part. It interfaces with the hot shoe and the mic is held by a magnet. You'll need a 6mm diameter magnet, maximum length >11mm. Have fun!
P
Printables
Low Profile Gopro/DJI/Insta360 Action Camera Mount
Ultra-low profile 3D printed mount built for action camera setups, including GoPro and DJI Osmo Action . Weighing an incredible 2.93g , it’s ultra-light without sacrificing strength—rigid, durable, and ready for real use. Its tiny…
P
Printables
Holder for phone and DJI Osmo pocket 3 camera
You'll need two screws (20mm long) and two M5 nuts. One is a 1/4-inch screw, the extension rod from the camera kit with a 1/4-inch thread, and a tripod with a 1/4-inch thread. Rubber bands are required for operation; we attach them using…
P
Printables
DJI_Mini_5_Pro_Controller_Cover
This is a protective cover designed specifically for the DJI Mini 5 Pro (RC 2 Controller) . It is designed to protect the screen and control sticks from damage during transport or storage. It fits perfectly and is easy to attach/detach.…
P
Printables
Ryze DJI Tello Prop Guard
Training Guard for the first Flights Weight 11 Grams Supports needed and require careful trimming
P
Printables
DJI Tello Prop Guard 2 Part
I ended up using 4 micro cable ties in addition to the clips Total Weight was 12 grams No Supports needed for centre Bracket New Model Added with less weight. requires 4 x 3mm holes drilling holes drilling to attach with Micro zip ties
P
Printables
DJI RS3-RS4-RS5 PRO SKADIS HOLDER (T-clip)
DJI RS3 & RS3 Pro Gimbal holder for IKEA Skadis Pegboard using T-Clip system for best quality and strenght. It can securely hold DJI RS3 and RS3 Pro with the battery grip. Designed to be put as in the photos to make up for the slight…
P
Printables
DJI Mini 3 Spare Props case
A simple case for storage of the spare props for a dji mini 3 (probably holds other mini series props to) If your printer has good tolerences, then the lid is simply a snug push fit on top. If it's too tight, you may need to split the stl…
P
Printables
Gridfinity DJI Osmo Pocket 1 with Phone Adapter Holders
Gridfinity DJI Osmo Pocket 1 modified with Phone Adapter Holders
P
Printables
Solo grip for DJI Osmo Pocekt 3
In the second version I added an eyelet for the index finger and modified it to accommodate the original gimbal cover.
P
Printables
DJI RC Recessed Stick Protectors - optimized
I printed them with Bambulab TPU for AMS - makes them perfect for the job.
P
Printables
Support DJI Osmo Action 6 Jeno / Jeno Ciné
Hello tout le monde ! Voici un support pour la DJI Osmo Action 6 compatible pour les frames Jeno. N'hésitez pas à me soutenir ici: https://taap.it/nepty <3 Hello everyone! Here is a mount for the DJI Osmo Action 6 compatible with Jeno…
P
Printables
Support DJI Osmo Action 6 avec fixation GoPro
Hello tout le monde ! Voici un support pour la DJI Osmo Action 6 compatible pour avec les fixations GoPro. N'hésitez pas à me soutenir ici: https://taap.it/nepty <3 Hello everyone! Here is a mount for the DJI Osmo Action 6 that is…
P
Printables
TBS Chupito camera cage for DJI FPV Air Unit
Required hardware: - Two M2.5 x 6mm screws, preferably countersunk - M2.5 tap - standard set of 4x screws for the camera - optional: 20mm M3 standoff Use CA glue or ABS slurry to attach the horizontal supports to the side plates.
P
Printables
DJI O4 Air Unit Lite Adapter & Mount
Overview This is a custom-designed mounting solution to fit the DJI O4 Air Unit Lite into the SpeedyBee Master 3X (or other frames designed for the original DJI O3 Air Unit). The O4 Lite has a different form factor and power requirements…
P
Printables
DJI Mini 4k Rugged Box
6x M3 30mm bolts required. Adhesive backed black felt is used to line the inserts.
P
Printables
DJI RC-N1 Remote Contoller Rugged Box
6x M3 30mm bolts required. Adhesive backed black felt is used to line the inserts.
P
Printables
DJI RS 3 Pro Battery USB-C Port Dust Cover (TPU)
Disclaimer (Important) Not tested on a real DJI RS 3 Pro battery yet. Fit can vary between printers, TPU brands/hardness, slicer settings, and even manufacturing tolerances of the gimbal/battery. Print and test. Please let me know how it…
P
Printables
DJI Osmo Nano: TPU Bando Case (V2)
I wasn't satisfied with the durability given by my first iteration of the mount. I kept breaking the TBS ND filters, so I went for another approach. I now use the screw-on ND filters (they can be found for cheap on aliexpress), and use a…
P
Printables
DJI ACTION4 CAMERA LENS CAP
Found another cap ( original name "DJI4 lens cover_LenseGap.stl" no clue where I found it this one: https://www.printables.com/model/1039265-dji-osmo-action-4-lens-cap ) that fits action4 good and modified it a bit thickening the bottom…
P
Printables
DJI O4 Air Unit Whoop Flywoo Wide modified canopy
I printed from petg, but it is better to print from smaller filaments (TPU, PC aero, or other aero materials) It doesn't break on impact Suitable for meteor 75 Feel free to leave your feedback!