DJI Mic Receiver Clip - Hot / Cold Shoe Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement (and stronger) clip for the DJI Mic Receiver
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 1117
- Wydruki
- 5
- Wyświetlenia
- 4945
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A replacement clip for the DJI Mic Receiver. As replacements cannot be purchased and appear to easily break looking on the forums decided to keep the original tucked in the box and print one for use day to day.
Although this does not fold (not a bad thing in my opinion), it is stronger and can be left fitted to the receiver when charging in the standard DJI case.
Print uses about 0.6mtr of filament, using 20% fill (although this is only for 3 or 4 layers) the rest is solid, so anything from 20% to 100% is fine.
Added two other thinner versions if you find the original too tight for your hot/cold shoe, medium is 0.2mm thinner and thin is 0.4mm thinner than the original.