Sunshade Bracket for Print Flat Bird Spikes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Twist-lock pressure-fit bracket for print-flat bird spikes to fit a Costco roll-up sunshade
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed the bird spikes to latch into the rail on a Costco roll-up sunshade. So I modified the existing bracket to have a twist-lock pressure fit inside the mounting channel of the shade. I printed 2 rows of spikes only, and used a dab of CA glue to adhere them to the press-fit brackets once in place.
The mud swallows that wanted to build up there have found another nesting spot nearby, which is exactly what I wanted!
Printed in PETG for heat resistance - my porch gets oven-like in the afternoon. It's fully sun-protected and mostly wind protected, so pick a material for your application.