Liczymy pasujące modele…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) SPIKES PUMPKIN 🎃🍃 A…
Spikes. They are cool. Print in your own settings, but more walls the better if your are cruel
Remixed the Spiked Wheels to fit the little Revo. It has brutal Grip, but should only be used on ice and hard snow. Otherwise, they will be gone in no time. Printed with PETG-CF with 5 walls and 40% Gyroid infill
This is a remix of my original model, modified to be shorter but with significantly longer spikes for increased deterrence. Lenght : 12,5 cm Width : 3,5 cm Height : 7 cm Spikes layout : 9 x 3 grid (27 spikes) The longer and sharper spikes…
Updated rear disc with spikes for mounting to the axle. (For modification with N30 engine)
This model is compatible with the lego system.
This model is compatible with the lego system.
obruč s hřeby na okovaný cep slouží k výrobě doplňkové zbraně do výbavy hry Kenka puppetgame jedná se o zjednodušenou podobu zbraně ze středověku a v českých zemích ji proslavili husité. Tyto kroužky se navlečou na dřevěnou tyč o průměru…
Highly recommend using tree auto support with 30% May look bad but I have a really good printer there was just an error and I was running really low on filament and didn’t have enough to do another and the new filament haven’t came yet…
Overview Give damaged solar garden lights a second life instead of replacing the entire lamp. The Solar Garden Light Repair System is a modular 3D printable replacement system designed for common round solar garden lights with an outer…
It is so to print Material: PLA/PETG etc. Size: 25cm long With 2 screw holes, but i fitted it with double sided tape
IMPORTANT: Print the bricks with line width set to 0.45. You may need to adjust flow before the bricks stay together well. If the bricks are too loose - add 1%, if they're too tight - reduce by 1%. The spikes can be very sharp. Don't…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Infill : 100% No support needed Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: textured…
This model is compatible with the lego system.
I printed as oriented with supports for the arch. I installed it on this helmet mount .
This model is compatible with the lego system.
This model is compatible with the lego system.
I constructed the holder for a slate sign on a grave. The Edge prevents the sign from slipping downwards. Spikes keeps the holder in place and the sign is presented in a good viewing angle. Printed it on my Prusa MK4 with Prusament PETG…
All three pieces are meant to be printed separately. I recommend printing the skull with supports.
Bowser bracelet with detachable/screwable spikes Since spikes and bracelet are printing separately allows for easy use of different filaments Printing instructions: Bracelet x 1 no support needed infill 10% Spikes x 7 support needed -…
These are pretty tall, meant for out in the garden. 0.1" Thick - you can scale Z axis if you wish to increase. Let me know if you want any custom labels. **PLA will warp in the sun depending on how deep you put it into the ground.…
This model is compatible with the lego system.
This is a quick spike I made for a Bowser Halloween costume. This is made to fit without any glue, cutting or modification to the shell itself at all. Simply unzip the shell where the stuffing is kept, hold the connector on the inside…
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The wedge shape lets you easily get them under tight wraps and deep enough to keep them from moving or flipping out sideways. The…
Pinchos para marcar los cultivos en el huerto
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The spikes can be added during tying, or ahead of time so the positioning is somewhat random. They can also be used in limb joints or…
experimenting with models since im new and tought this would be a cool idea for my 13 dummy SUPPORTS ARE NEEDED
Cat kept sleeping on my chair and wiping 10,000 hairs all over it, I got annoyed. These spikes are hollow in the bottom so they stack, there are two size options that snap together. I tried a duller option first, my cat slept right on top…
We all blame cats, I get it… However Kids account for 99.999% of Dad online downtime (According to me). #DadsUnite, #Idont know how hashtags work, #Dads>Kids
Usage These are designed to be used during BDSM play to add some extra sensation and fun. There are 3 different sizes with 2 sizes of spikes. Similar to a nail bed, the more spikes there are, the less intense it is. For safety reasons,…
Filamentwechsel: bei 2.1mm Benötigt werden: 2x Magnete Ø8x2mm ( S-08-02-N / 1.1kg ) oder ( 1x Ø8x4mm / S-08-04-N / 1.8kg ) Opt. Gas-Brenner / Heissluftföhn NASA - Webb's Diffraction Spikes
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The hooked shape lets you easily get them under tight wraps and into position painlessly (well, not totally painlessly 😅). For safety…
Welcome to the world of Printing on Fabric!!! Its really simple! Just Follow these steps: Print 2-3 Layers Hit Pause Place the Tulle fabric Mount it with tape flat on top the printed parts Resume the Print When you use Simplyfied3D you…
These are fun fidget toys that I made to practice revolution in onshape and to test printing in place. There are two variants of it one with spikes and one without any. You will need supports to keep the balls suspended in the air to make…
This model is compatible with the lego system.
A different bracket for the spikes that is intended to be used on soil
This model is compatible with the lego system.
This should help to hold your Babylock model U foot pedal in place on the carpet. The spikes are sharp when you print them. Be careful. I split the spike apart from the foot base to make it easier to print without supports. I also removed…
This should help to hold your Babylock model U foot pedal in place on the carpet. The spikes are sharp when you print them. Be careful. I split the spike apart from the foot base to make it easier to print without supports. I also removed…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Tiefling Baleful Spikes from Baldurs Gate 3. The supports required. Some…
I don't know what brand my ice gripper overshoe things are, but if the holes in yours are about 5.5mm these should fit - you need an M3 x 12mm countersunk screw and a nylock nut. I haven't used them on ice yet, so might fall apart! Having…
JWST inspired diffraction spike cover to add to your zenithstar 61 II telescope. Pic attached of what they look like. You will need some kind of felt tape to attach on the inside. It will be loose if you don't. This is what I used…
I modified the original and the remix for the ground spike. I wanted to print this on my Prusa Mini so I modified the spikes to 6 spikes to fit the print bed. I also wanted to be able to poke deeper into the flower bed with a layer of…
Needed some spikes because I only got 4 with the speakers. They are exact copies of the spikes delivered with Chariot Hiper speakers. The hole in the base is approx 5mm and the base itself 25mm. You can adjust the infill for softer or…
OrganicFlaw Spikes, a unique wall decoration that measures 50cm / 19.7in in both length and height. This piece was generated using the Fusion 360 API, and its design focuses on smooth transitions between elements to create an organic…
These are spacers used to adapt the GD25 Mast Tip to a spike like the Dude Spike 2.0 or the spike mount Chameleon Delta Loop. I have printed at 100% infill, you do you. Here is a video showing it with the GD25 and the dude spike 2.0
I printed in petg. I snapped the very fragile tips off with my finger which left the rest of the spike looking nice. You could edit the file to make the spikes shorter so that the tips aren't fragile.
Needed some bird spikes for Ø24mm installation tube. Printed in PETG. Infill of 25% should be minimum.
Hi! My first upload here on Printables! I have a Robomow RC308u lawnmower. The extra pair of wheels I got in the package of the Robomower is completley worn out after one season. So I made a new pair with twice the spikes! I have only…
This is the Ice Spikes set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
A spikes for better grip that helps a landroid going uphill or in a sharp corner
The original model was a great replacement for my set of lights, which came with flimsy, thin plastic spikes that would break even if my dogs just brushed against them. After the first print, I realized the pegs were too thick for my…
I found the original design to be a bit too flimsy and easy to bend with the regular round legs, especially when you have a tall plant that leans on it, because the legs could be pulled from the holes with ease. I recreated the design and…
Masque à aigrettes conçu pour la Skywatcher Equinox 80ED. Tient bien en place, ne tourne pas pendant les prises des vue. "Spikes mask" for the Skywatcher Equinox 80ED. Stays in place, don't move during the shoot. Print Settings Printer…
My soaker hose kept bending away from where I wanted it thanks to the sun's heat, occasionally landing on my delicate seedlings, so I made these hooked soil spikes to hold it down. Now my soaker hose stays where I put it, and my seedlings…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
This model is compatible with the lego system.
"Spikes" to deter cats from standing on the edge of glass tabletops, e.g. a TV stand where they then paw and jump at the TV from. Prints on its side with zero supports.
Info: created a base for pieces of wire, because: wire is industrial standard for usual anti-bird spikes and wire spikes are much less visible from distance than anything printed, thus it is better to print only base and buy wire this is…
*FOR PROP USE ONLY * Multi-color (No AMS Required) and regular versions available. Models are in print orientation. Scaled for mens small to medium hands so check measurements and adjust if necessary before printing. Kryptonite Batarang…
This model is for repair of: Amazon link/description: https://www.amazon.de/dp/B08ZX14XZF?psc=1&ref=ppx_yo2ov_dt_b_product_details Solar Bodenleuchte Warmweiß, 12 LEDs Solarleuchten für Außen, 4 Stück - Led Solar Gartenleuchten, IP65…
Translucent spikes, see github projekt and the drawing on onshape .
Garden Soil Puncher with Adjustable Spikes – Modular Planting Tool This Garden Soil Puncher is a versatile tool designed for gardeners who value precision and efficiency in planting. Its modular design allows you to add or remove spikes…
Plant Labels for Vegetable Seedlings Introducing practical and durable plant labels designed to help you keep track of your vegetable garden. This set includes 28 interchangeable labels for a wide variety of popular vegetables and fruits.…
Hair clip with extra spikes at base of teeth for more grip and stability. To be used with the spring and axle from a broken clip. no supports needed.
These modular anti-pigeon spikes are designed to prevent birds from landing on fences, railings, balconies or similar surfaces. Each module measures 20 cm long, 3.5 cm wide and 4 cm high , and features a 3x14 array of sharp conical spikes…
Since it was difficult to get those parts in DIY stores I designed spare models which can quite easily be adopted (i.e. length).
Cat deterrent spikes for the top of your fence. These have quite a thin base, but are quite strong enough. Simply screw them to the top of your fence to keep cats away. Two sixes, 250mm long and 80mm long. This should do you but you can…
I've prepared two models with different spike types. Original model: https://www.printables.com/model/1325786-traction-assist-wheel-for-parkside-pmrda-20-li-b2 3D printing spikes for Parkside robotic lawnmowers. Compatible with the PMRDA…
I got fed up with catching my cat sleeping on top of my $3000 pc, so i took inspiration from the spikes they use to keep birds off of ledges and created these. Just print about 20 of them and slide them into the grooves on top of your…
I bought a set of bird spikes on Amazon and ended up with way more spikes than I had bases to put the spikes in (a picture of one of the original bases, made of metal, is in my first photo). Rather than buy another set of spikes/bases, I…
I'had the problem that my spiked shoes torn other things inside my sport bag. Since I didn't wanted to remove the spikes each time, i printed myself covers. They fit for the Asics Hyper MD (dimensions see picture). In future I can make…
I have a smaller printer so I cut it into 4 pieces.
Suddenly was having trouble with the back of my bass drum pedal sliding up when using it, causing the front to tip forward and reduce the distance from the beater and the electronic bass drum pad. These spikes are designed to help stop…
Gyro2 with spike pattern! ⚠This gyro is a little sharp so be careful!⚠ Looking for a Gyro that's fast, fun, and easy to print? Meet Gyro2. It has that perfect spin you know you want and an awesome pattern that is sure to impress anyone!…
This model is compatible with the lego system.
I recently got an L-Tek arcade-style dance pad for use with Stepmania. Unfortunately even with its weight and its nonslip underside it still slides around a bit on my carpet. So I made these carpet spikes to go under the corners. v2 adds…
A 3D model to create a riser foot with spikes to hold it in place on a carpet. I was mounting some components on floor of my Jeep. I had two use cases: one was to level out a component due to the contours of the Jeep floor. The other was…
I needed to some non-stabby fence spikes to keep my cats from climbing the fence to get out. We have a busy road 100m away from us, and there are often cats being hit by traffic.
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) SPIKES PUMPKIN 🎃🍃 A…
Spikes. They are cool. Print in your own settings, but more walls the better if your are cruel
I print this model out of PETG with 6 walls and 6 top/bottom layers so that you can really push it into the ground without breaking it. This seems to do the trick. This has replaced the flimsy little spikes that came with the foam…
Adapterplatten Spikes für Fishead Lautsprecher StrEight 1.8 FS Ich habe Adapterplatten für die Lautsprecher-Spikes konstruiert, da sich die originalen Aufnahmeplatten leider nicht mit den „handwerklichen Besonderheiten“ meines…
![Bowser Spike Bracelet [detachable spikes!]](https://media.printables.com/media/prints/1052487/images/7975407_bc5e8771-478f-47dd-8cbc-35643fa4fcf6_92055d3a-0f84-49f8-8896-c551d6b1a9ba/pxl_20241027_000027358.jpg)
