Rope bondage spikes | Shibari thorns (Flat V2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun little addition to your rope play. These things will lay under your ropes to add some spikey sensations.
- Ocena
- 5 / 5
- Polubienia
- 85
- Pobrania
- 484
- Wydruki
- 1
- Wyświetlenia
- 2786
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Usage
These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The hooked shape lets you easily get them under tight wraps and into position painlessly (well, not totally painlessly 😅).
For safety reasons, they should only be used by a single person, as they potentially can penetrate skin, especially if used on the underside of a suspension cuff. Sanitize after use with a method appropriate for your filament (e.g., isopropanol for PLA). Be aware: due to surface defects from 3D printing, microbes may still be present after sanitizing.
Print Instructions
Print with standard settings, and an infill of 20% with 4 perimeters of PLA+ seems sufficient for strength. It is designed for two 6 mm bands, so scale up or down if using larger or smaller rope, if desired.