Rope bondage spikes | Shibari thorns (Flat V2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fun little addition to your rope play. These things will lay under your ropes to add some spikey sensations.
- Rating
- 5 / 5
- Likes
- 87
- Downloads
- 489
- Makes
- 1
- Views
- 2,832
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Usage
These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The hooked shape lets you easily get them under tight wraps and into position painlessly (well, not totally painlessly 😅).
For safety reasons, they should only be used by a single person, as they potentially can penetrate skin, especially if used on the underside of a suspension cuff. Sanitize after use with a method appropriate for your filament (e.g., isopropanol for PLA). Be aware: due to surface defects from 3D printing, microbes may still be present after sanitizing.
Print Instructions
Print with standard settings, and an infill of 20% with 4 perimeters of PLA+ seems sufficient for strength. It is designed for two 6 mm bands, so scale up or down if using larger or smaller rope, if desired.