Wheelchair Handle Spikes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spiked sleeve to attach to wheelchair handles and deter people from moving a wheelchair user without consent.
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 2025
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A spiked sleeve to attach to a wheelchair's handles and deter people from moving a wheelchair user without consent.
No one design will fit all of the wheelchair handles out there so I have added a central trench to allow a zip-tie or a similar device to fix the sleeve to a slimmer handle. You can even use something like Blu Tack for a temporary solution.
Depending on your machine and the orientation of the print on your bed, I recommend printing with supports and/or a brim. I printed this one vertically with supports for the spikes and it came out perfectly on my Ender 3 with Prusa's slicer.
If you have any ideas for improvements or you encounter any problems please let me know and I will do my best to help out.
I have other designs available in my profile that you might like, too.
Thanks for dropping by!