Liczymy pasujące modele…
I’ve designed a practical hook that can be mounted on a wheelchair at the headrest area. The hook fits into a 15×15 mm square opening . You can easily hang even a heavy bag or backpack on it without any issues. Important: Make sure to use…
Wheelchair Controller Handle 6mm Mount Joystick Printed with TPU
While it is typical for dogs to have issues with their hind legs, there are still some that have issues supporting themselves with their front legs as well. Our Main goal was to make sure the design was sturdy while still being able to…
Intro My friend’s guinea pig lost the ability to move its hind legs due to illness. He asked me to help by 3D printing a wheelchair so she could move again. As a former guinea pig owner, I couldn’t say no. However, I wasn’t satisfied with…
A wheelchair for medium birds like pigeons. All the parts are printable and the number of them are in the name. I want to replace the front with caster wheels, but I didn't have time. It's not tested yet, but I encourage you to try it and…
Dlocks are expensive , I dont like existing wheelchair brakes , so have d'locks , however they have broken many spokes over time and broken my spingery wheels , so I have printed the hub bracket the that spreads the loads across the wheel…
This model is a compact collector designed to store aluminum can pull tabs , helping support recycling initiatives that convert tabs into wheelchairs for people in need . The design is simple, durable, and easy to print, making it ideal…
Mike Hansen from Barbaric Mellons uses an Invacare Torque–style power wheelchair with an ASL 128 Molecule Joystick as his primary drive control. This version of DriveKeys replaces the fixed front section of the drive control mount on his…
Simple goldfish sleeve designed for covering sharp edges on wheelchair brake handles (Wolturnus W5) Project Background One of my customers wanted to convert his old wheelchair so he could go fishing . We worked well together and had a lot…
I printed this with ABS, 0.6mm nozzle, 0.35mm layers. The lid has been glued with ABS-Acetone slurry to the base. It's fixed to the wall with 2 3.5mm screws.
A remix of the Swivel Wheelchair Cup Holder adapted so that it can hold regular mugs with a handle
The KWK D09 power chair has an armrest with a metal tube underneath so the original mounting method was not suitable. However this chair can have the controls fitted to either side so there is a spare hold at the end of the armrest with a…
This is a sturdy wheelchair for my daughter's toy hospital. I first attempted to print this wonderful model ( https://www.printables.com/model/419702-mini-wheelchair/ ), and while I love the details of that design, it was too fragile to…
The continuation of the orthopedic related keychains series. I present you the wheelchair. If you want bi color you need to make a filament swap at layer 2.80. I uploaded the project file so it should be saved. have a good print.
I made a simple steering knob for electric wheelchair in case someone needs a replacement duo to loosing or breaking old one. Inner hole diameter is 6.5mm + 0.1mm
This is a simple stand to display your 2024 coin from NOT A Wheelchair. When printed in Nylon 12 from FUSE 1 you can almost invert the stand 180 degrees before the coin will fall out. I have not tested this on other printers or materials…
This is meant as an asset to add to your designs. Category: 2D Art
A couple years ago my poor pup was having difficulty with her hind legs. I started searching for dog wheelchairs to assist her and didn't like what was available. I started to model this concept for and adjustable model that was also…
Español: El diseño de esta pieza está pensado para poder encajarse a presión en el eje del joystick de una silla de ruedas electrónica. Se trata de un pomo en forma de “U” con el apoyo para la mano redondeado. Entre los archivos de…
Español: El diseño de esta pieza está pensado para poder encajarse a presión en el eje del joystick de una silla de ruedas electrónica. Se trata de un pomo en forma de “T” con el apoyo para la mano redondeado. Entre los archivos de…
These are wheel chair control sticks I made for a special little lady who was having difficulty steering her chair with the options available. They are designed to be used with a foot but they'll be perfectly suited for use by hand also.…
Español: El diseño de esta pieza está pensado para poder cargar un teléfono móvil o una Tablet aprovechando las baterías de la propia silla de ruedas electrónica, ya que prácticamente todas ellas utilizan el mismo tipo de conector como…
This remix has been created to allow the wheelchair to be used on the 20cm block dolls. The main change is the adaptation of the model and its enlargement to x500, allowing it to be attached to the doll. Tree-like supports have been used.…
This product is created to mount a buddy button in a corner of a wheelchair table. On this way it has a smooth surface around it. Also you can use it for gamecontrol. You can attach a 64mm buddy button.
Carpet and lino have very different thickness, so doorways use a carpet gripper to create a neat join. Unfortunately, this creates a ~12mm barrier that hinders the small wheels of a walker or light wheelchair. This design is a simple ramp…
This design allows you to attach an ashtray to the armrest of a wheelchair (Action model, Invacare). The cigarette holder allows you to hold the cigarette for those who cannot. You can screw the ashtray onto this support piece and then…
Just a few options for replacement wheelchair joystick knobs. I got tired of the standard black rubber ones becoming loose and popping off. I’ve tested the fit of these with the R-Net joysticks on Permobil wheelchairs (R-Net Color, PJSM,…
wheelchair stopper insert fot next level racing stand 2.0
A friend of mine sits in a wheelchair. She had a mount to hold her waterbottle but couldn't find anything on the market that was holding both her waterbottle and cellphone. That's why I've printed it. This is already version 6 due to…
Our prototype of this model, was printed using PLA with 100% infill density, and no support. A wall flange for small pipes was used to fix the model to the joystick pin, and the four holes underneath the model, is fitting for the one we…
Customisable Controller for electric wheelchair. Co-created with the user and volunteers at SalvageGarden Assistive Makerspace Inclusive Tech Sundays at Punggol Library, Singapore. https://linktr.ee/salvagegarden for more
📌 3D Scanned Wheelchair Fender – Free Replacement Part Here’s a 3D scan of my wheelchair’s plastic fender —a common part that breaks often and costs way too much to replace! As a disabled veteran , my wheelchair is a critical part of my…
Wheelchair controller 3D scanned by CR Raptor. Controller model created by Fusion 360. Holder modeled for the Brodit RAM-B-309. If you have a different type of wheelchair with a different shape of controller, please contact me. I can 3D…
I would say it is probably to fragile to use as a toy, but otherwise I am happy with it:)
The model is made up of four parts which are pieced together by nuts and bolts to provide you with a tablet mount for a wheelchair. Inspired by the design of auditorium seats with removable tabletops, this mount can be relocated out of…
I created a beverage holder that can hold up to 5 cans of your choosing. The design is a very tight fit so you may want to size up for cans to slide in easier. Will fit on a wheelchair that has a 1.25" rear bar Requires two zip ties to…
Peloty pro invalidní vozík Meyra mé dcery. Skládá se ze dvou částí ...1) PetG pelot 2) TPU návlek
This is technically less a v2 then just another type of guinea pig wheelchair with 4 wheels instead of 2 for those who need to work up some muscles in the front legs before using the v1 with 2 wheels which moves around much better because…
TESTED AND WORKING!!! NO SUPPORT REQUIRED :D (Tools needed: hair dryer with hot air+flat head screw driver) A design Im working on for a friends disabled guinea pig. has room for approx. 1" straps. Here are the wheels-…
support pour canne clipsable diamètre 22 mm pour la canne et diamètre 19 mm pour le fauteuil
I would like to share wheelchair joystick handle which I made for my 10 years old daughter. For adult or older person it has to be scaled and of course there are different mounting on each wheelchair - that's also reason why it's made…
This is a multi-part model for a "license plate" for a Walkin' Wheels small dog wheelchair. The rear portion slides over the bare metal rod of the wheelchair; the front portion is like a license plate you can screw onto it, so you can put…
Assists wheelchair users with closing doors, not needing to risk fingers getting smashed in the hinges. Handle snaps into the bracket/hinge (may need to press hard). Can be attached to the door using double-sided mounting tape. I printed…
An easy to remove and attach ring of spikes for your wheelchair handles, to prevent unwanted ‘assistance’ from helpful strangers. Inspired by a print by JDanu (https://www.thingiverse.com/thing:5213822) but rebuilt for easier printing and…
after breaking my spinergy wheels, decided to use hubs and create some off-road wheels, so bought new spokes and rims and printed template to help drill, then wanted oval rubber push rims much better for wrists, V1 was too flexible , so…
when swapping wheelchair or wheels , always need to change axle pins and they need adjusting , in fact my right axle on RGK chair is slight different to left (very annoying) , so always having to adjust it slightly if mixup the wheels…
I’ve designed a practical hook that can be mounted on a wheelchair at the headrest area. The hook fits into a 15×15 mm square opening . You can easily hang even a heavy bag or backpack on it without any issues. Important: Make sure to use…
A modular system to attach accessories to your wheelchair or stroller. I'm sure it could be of some use on bicycles too but I've not tested it with bikes and off-roading is possibly pushing it a bit far :D Some very ‘sensible’ accessories…
Wheelchair Controller Handle 6mm Mount Joystick Printed with TPU
Print without supports. Material PETG or Better WheelChair Bracket/Clamp to be printed with 4 walls 100% infill Controller Mount to be printed with 4 walls 25% Gyroid infill Use original screws to mount the controller to the plate. M4…
About This project is dedicated to our late friend Dafgårds Fläskschnitzel, pictured above. (In case you speak Swedish, yes, our chickens have somewhat unorthodox names.) Know a bird with special needs but can't print this yourself? I'll…
Wheelchair Cell Cradle Designed for disabled veteran with limited mobility and dexterity. Cell phone rests in cradle, where it is wirelessly charged through a charging puck affixed to the back. Power to the wireless puck is provided by…
A replacement for the power and speed toggles found on some Permobil and Quickie wheelchairs. I have found that the stock units occasionally break inside of the joystick module causing the toggle fall off. In my experience, the toggles…
The ECTR01 Wheelchair has brake plates that wear over time, creating a groove which stops them from working. I created this brake sleeve to slide over the top to give a bit more life to the brake plates. I printed this in PETG but would…
This chair was made for sausage dogs and supports up to 10 kg The pdf file contains the parts needed to assemble the chair I hope this project helps paraplegic dog owners.
Slide the two pieces together to attach around the wheelchair arm and then fix in place with an M3 screw.
Note: no warranty provided – use at your own risk.
Print the arm brackets in PETG with at least 25-50% infill. Using a long version for one side and short version for the other side can make it easier to take on and off. Print in PETG with at least 25-50% infill. Reinforce by inserting a…
Modular interior door threshold ramp. Designed to print easily, be durable, simple to understand and expandable. -Prints without supports -Three walls & 15% infill is sufficient for strength due to the design. -Scale to any size / slope…
Newly designed and stronger handle used for securing the lifting mechanism on the Elesmart wheelchair attachment. Tried and tested myself. Disclaimer: You will loose the adjustable rotational mechanism, this is due to design and strength…
Direct replacement for KUSHELL K-series wheelchair brake lever grip, the OEM rubber ones wear out fast and split/fall off.(maybe I'm just heavy handed) Modelled in tinker cad Recommend TPU for comfort and grip plus a bit of compliance…
Made this for a friend's wheelchair, print with full supports 100 percent infill
Whimsy Wheels – Garden Gnome in a Wheelchair Bring a touch of heart and humor to your garden or shelf with this charming wheelchair gnome ! Whether you're collecting gnomes, spreading inclusivity, or just love a good smile, this little…
Luggage proter for a wheelchair. Useful for everyday to carry various things. Length: 180 mm, width: 25 mm.
Rampe modulable pour fauteuil roulant (ou autre objet roulant, facilement redimensionnable). Dimensions des pièces adaptées au plateau de la Prusa MK4. Fichier f3d paramétrique pour changer l'angle d'inclinaison (20° par défaut) ou la…
Chonky Wheelchair Kitten – The Roundest Rollin' Hero Meet the bravest little bean on wheels! Some supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort. Adjusted the Z-top height on supports for…
While it is typical for dogs to have issues with their hind legs, there are still some that have issues supporting themselves with their front legs as well. Our Main goal was to make sure the design was sturdy while still being able to…
Side cup that clips onto typical wheelchair. Flips over for cleaning. I’ve reached this this configuration by having previous versions break. This is version 7 and it is in 2 parts to fit my printer’s volume. Printed at 80% infill for…
An adjustable model for a supportive brace for disabled or movement limited dogs or cats.
Assists wheelchair users with closing doors, not needing to risk fingers getting smashed in the hinges. Can be attached to the door with screws or using double-sided mounting tape. Printed in PETG. Use an M4 screw and nut for the…
Intro My friend’s guinea pig lost the ability to move its hind legs due to illness. He asked me to help by 3D printing a wheelchair so she could move again. As a former guinea pig owner, I couldn’t say no. However, I wasn’t satisfied with…
Handle brake wheelchair, no need for support at all. I suggest using 3 walls and more infill.
by @CriptasticHacker Please leave a ❤if you like this design. It makes me happy :) My website: https://cripsrise.neocities.org/ https://hackaday.io/CriptasticHacker https://www.youtube.com/@CriptasticHacker Install video here: Requires…
A wheelchair for medium birds like pigeons. All the parts are printable and the number of them are in the name. I want to replace the front with caster wheels, but I didn't have time. It's not tested yet, but I encourage you to try it and…
Dlocks are expensive , I dont like existing wheelchair brakes , so have d'locks , however they have broken many spokes over time and broken my spingery wheels , so I have printed the hub bracket the that spreads the loads across the wheel…
This model is a compact collector designed to store aluminum can pull tabs , helping support recycling initiatives that convert tabs into wheelchairs for people in need . The design is simple, durable, and easy to print, making it ideal…
Mike Hansen from Barbaric Mellons uses an Invacare Torque–style power wheelchair with an ASL 128 Molecule Joystick as his primary drive control. This version of DriveKeys replaces the fixed front section of the drive control mount on his…
The basic wheelchair access sign for community use. This one in particular was done by request. Comment if you like and If I can see interest I will make more. Enjoy. Category: Signs & Logos
Replacement bracket for a Newton-style manual wheelchair brake assembly. This is the structural mounting component with the cylindrical mount and dual through-holes that connect the brake handle and linkage to the wheelchair frame. This…
Simple goldfish sleeve designed for covering sharp edges on wheelchair brake handles (Wolturnus W5) Project Background One of my customers wanted to convert his old wheelchair so he could go fishing . We worked well together and had a lot…
Originally just for Christmas but now permanent to improve visibility at night in our busy city centre. These are small flex holders for rechargeable bottle lights that can be added to standard 24" spoked wheel-chair wheels. Located at…
This phone holder was created to attach to the Invacare TDX electric wheelchair. It is currently used in combination with the iPhone 14. Advised to print the phone holder clamp and screw phone clamp flat and from stronger material such as…
So my original “hacked” Cutup cup holder decided to stop being useful. I decided I needed something that would hold both my phone and the ever important cup of coffee! this was my longest print at 26 hours with the supports. I have a…
Cute little piggy sleeve designed for covering wheelchair brake handles ( 4ma3ma TUK 24) Project Background One of my customers wanted to give her wheelchair a little farm-themed touch. When we came across these little pigs, we knew right…
I printed this with ABS, 0.6mm nozzle, 0.35mm layers. The lid has been glued with ABS-Acetone slurry to the base. It's fixed to the wall with 2 3.5mm screws.
A remix of the Swivel Wheelchair Cup Holder adapted so that it can hold regular mugs with a handle
The KWK D09 power chair has an armrest with a metal tube underneath so the original mounting method was not suitable. However this chair can have the controls fitted to either side so there is a spare hold at the end of the armrest with a…
Request by someone special to me who wanted to combine the Dungeons & Dragons D20 Dice with a wheelchair, replacing the simple one supplied. Spindle diameter is 6.35mm / ¼" with a depth of 15mm. Print it in PLA with a colour of your…
