Wheelchair Cupholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A removable wheelchair cup-holder attachment.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I originally made this for my disabled uncle. I figured others should be able to use it if they can make it work.
The bracket that you can optionally bolt onto the railing of the wheelchair has a dovetail to allow it to be removed (if bolted). If you opt not to use bolts, it will snap in place, it should be able to handle the weight of a cup, but it has the risk of being knocked off.
The diameter of the railing that I based this model on was .750 inches or 19.05 mm. If you require a different diameter, leave a comment and I'll try to accommodate your request.
The tolerance for the dovetail is designed to be fairly tight, a bit of roughing up with sandpaper helped it to glide off easily.
Here are the bolts and lock nuts that I used:
Countersunk Bolt: (¼-20)
https://www.amazon.com/dp/B08QJ3KSNG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Lock Nut: (¼-20)
https://www.amazon.com/dp/B078NMHM8Q?ref=ppx_yo2ov_dt_b_fed_asin_title