Wheelchair extension handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print these when the push handles of the wheelchair are too low for you.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 558
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
My kid is in a wheelchair for a couple of weeks, but the handles to push her around are just a little to low for me.
So I created these extension pieces to have a more comfortable position when walking arround a bit longer :-).
I printed these with Bambu Lab PLA at:
- 0.2mm layerheight
- 5 walls
- 10 Top&Bottom layers (to have about 2mm thick shell everywhere)
- 40% triangle infill.
I used “slower” print settings (80-160mm/s) (just to have a cleaner finish).
You should print the Clamp 4 times (no need to mirror).
The handle has to be printed twice, 1x normal, 1x mirrored.
The hook is optional and can be added between the clamp opening. (it is a bit loose bu it works :-).
For mounting I used:
- 4x M5x40mm bolt
- 4x M5x30 bolt
- 8x M5 nut
- 8x M5 rounds or washers.
Enjoy.