Wheelchair extension handles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print these when the push handles of the wheelchair are too low for you.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 85
- Makes
- 0
- Views
- 558
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
My kid is in a wheelchair for a couple of weeks, but the handles to push her around are just a little to low for me.
So I created these extension pieces to have a more comfortable position when walking arround a bit longer :-).
I printed these with Bambu Lab PLA at:
- 0.2mm layerheight
- 5 walls
- 10 Top&Bottom layers (to have about 2mm thick shell everywhere)
- 40% triangle infill.
I used “slower” print settings (80-160mm/s) (just to have a cleaner finish).
You should print the Clamp 4 times (no need to mirror).
The handle has to be printed twice, 1x normal, 1x mirrored.
The hook is optional and can be added between the clamp opening. (it is a bit loose bu it works :-).
For mounting I used:
- 4x M5x40mm bolt
- 4x M5x30 bolt
- 8x M5 nut
- 8x M5 rounds or washers.
Enjoy.