Counting matching models…
I use 1.75mm filament which is perfect for many recessed bind buttons. The problem is that usually misplace them if they're in my bag for the googles etc. Mainly because of this I made a knob to hold onto which “might” result in them…
I made a big mistake and put my boards up, with half of them not being aligned with the other half… so had to push out a dozen or so inserts out. My thumb complained… so here's one with a little longer lever to go easier on the thumb :).…
A few days ago, my wife was terribly angry because the sink plug had closed the drain and could no longer be opened. The reason for this was that the pressure plate on the sink plug was too small. Any normal person would go to the…
Both the repistory of adjustable pusher and the corresponding manual for the Bolt OS select fire system
Container Lid Pusher for Dyson V10 Vacuum Cleaner Over time, the lid of the vacuum cleaner container did not open for the first time. The reason turned out to be an erased pusher. The replacement version is made with a 2 mm margin. To…
After several dropping accidents, the original "pusher" for my Kitchenaid 5KSMVSA Fresh Prep Slicer and Shredder attachment exploded. Like many of these things, finding a replacement part without buying the whole she-bang again is a…
Replacement part for a Singer/Superba (and therefore proabably white, phildar...) knitting machine. This is part of the tension mast -- if the end caps ever fall off, this part is very easy to lose. It's the cheddar yellow part in the…
After brewing your coffee, simply insert the basket into the stand and push down - the puck will come out. This convenient design allows for easy removal of the coffee puck , eliminating the risk of burning your hands while pushing it…
I was tired of printing Benchy's just for color representation. So i made it a little more useful! Everyone with a core 1 should have a good rivet puller/pusher in the tool box. Use the bottom of the boat to pull your rivet, and use the…
This combined with the double stack mag reciever (check my profile) turns your protean into an LMG with a 36-50 dart capacity and whatever the rate of fire you desire, at least within reasonable limits because idk how well it works with…
Hello, Today I have for you a Cat Food Extruder, for pouches . Not a single piece will remain in the packaging! The cats will eat every last bit! :-) The printing is quite demanding! Good luck with the printing! I used PLA/PETG as the…
THESE HAVE NOT BEEN FLOWN YET. PROTOTYPE DESIGN NEEDING REFINEMENT! AND ALMOST FOOLISH TO TRY BUT THAT'S NOT STOPPING ME. PROCEED ACCORDINGLY. ON THE MODEL THESE WERE DESIGNED FOR, THE ENGINES ARE COUNTERROTATING. THE LEFT MOTOR SPINS…
3D model description These sturdy tracks keep the dozer blade steady so it can move soil, rubble, sand, or even stubborn cookie crumbs out of the way. This one was designed by Makerbot. 3D printing settings Printer Brand: MakerBot…
A replacement Stryfe pusher. Also works with any blaster that can take a Stryfe pusher. No additional hardware required! This is designed to print without added supports.
Will Need 2 - 80mm M4 spacers 2 - M4 x 10mm socket head 2 - M4 x 16mm socket head
Slide this adaptor into the back of your MK3 upper. You can then use Spiggytech's Glock sight pusher to press the rear sight. May work on other Ruger variants but I only have the MK3.
TPU piece obviously, print solid The little bevel is supposed to face towards the chamber, but it shouldn't matter much Note that the seating on this is very tight, this is the only way I got nightingale mags to stop stripping the O-Ring.
My design is not the best at all and is very crude, but it does the job nicely. Two M5 bolt are needed to attach the lever and the triger, though it could be replace with a printed cylinder if you don't have the screws under hand.
I don't need any non-standard, non-20cm spools support. I just needed a quick and simple fix near empty spools jumping on retracting because of too week default springs. I've printed it in PA6, and additionally boiled it for 15 minutes…
This replaces the internal sliding part on a hot wheels slam/smash launcher thingy. I made this specifically to fix a snapped part in the "Hot Wheels Action Double Loop Dash Playset". I know there are some variations of their launchers…
I was inspired by @abrugger (https://www.thingiverse.com/thing:6968792/files; I did not use their files, measurements, or geometry). I tried to make print in place work, but it either fused together or the pushers would immediately…
This replacement pusher design aims to mitigate several jamming scenarios with the stock pusher on the XLS which may be caused by stacking tolerances, including: Darts getting stuck in the pusher ring Darts getting pulled backwards on…
Goblin style dart tooth with elastic to keep shells pushed into the Trident O-ring.
It's very simple and easy to make! ) - If you enjoy my 3D models and want to support my work, feel free to donate via PayPal . Every contribution helps me create more content. Thank you for your support! P.S. check out my profile on…
If you're interested in a prebuilt or custom blaster build, please check GryphonsAndMore on Etsy! This is sort of hard to explain. The Gryphon is a “nerf” style foam blaster by Flygonial. There is a remix called Shirdal P4 by Skwiggums.…
Spekkie is modeled after a diamond shaped marshmallow ("spekje" in Dutch). It's a simple pusher bot weighing in at only 138 grams. It features an integrated switch and 2 LEDs for determining orientation and is capable of driving upside…
Set tent stakes into hard soil with this small and lightweight tool. No more pushing on tent stakes until it hurts, or looking around for naturally occurring hammers. The small size is perfect for ounce-counting backpackers. The…
This is a little tool to slip over the end of a tent peg, making it easier to push into the ground. It's shaped to fit nicely in the palm when pushing with a hand, but can just as easily be used with a foot. This is sized to fit the pegs…
I wanted to convert my stryfe to half darts, but couldn't find a pusher that I liked, so I made my own! Some notes: Not compatible with unmodified daybreak cages, since their dart guide interferes with extended pushers. You can fix that…
I was trying to find easy way how to push thing by my laser to the table. I made 7mm holes but with the screws or something elese it was too difficult. This system is easy to handle just to push one part inside the hole secure with the…
Who knew I would be making cookie cutters? Works great with bread and fruit as well. The pusher was an idea to get the cookie dough out without destroying it - apparently it works~!
These parts tend to crack around the axle, so you only get half page prints, so here is a replacement part. I have no idea what the actual name of it is, so let me know if you know a better name than printhead pusher 😅 The dimensions are…
Pusher piece as per the photos. The diameters are 15 and 21 mm. Created with onshape. Link here: https://cad.onshape.com/documents/752ce8696cb5f19bf32a3073/w/613d086d5e3faafc4dc09bb8/e/fde3f7a5b9d2c44bfc97f3ae Printed with PLA. 4 walls…
You'll need M3x10 screws or something similar. I used some screws for plastic that are 3.1x10. Both pieces are printed in PETG and glued together. I used a 0.6mm nozzle and around 5-6 perimeters with a 50% infill.
When downloading, do not forget that you do not need to click Download All, because in this case you will get a 404 error, because the site is broken and no one is going to fix it. Download files one at a time by clicking Download each…
Problem Have you been driving on the highway and you windscreen wipers are bouncing on the windows. Or you want to use the wipes in rain, but then don't have good contact with the glass? Solution This jig pushes the car's windscreen wiper…
Update 06/03/2025: Turns out that i have uploaded the wrong Pusher STL, this could have caused feeding issues, the new one fixes them. Introduction This is a full-auto Pusher Group for the Protean Foam Blaster. Instead of the solenoid…
I made this remix of hjodr's pedal pusher because the design had some minor flaws. I also made the ribs slightly different, The part can now be printed on it's side without support! I would advise to print with PETG Print Settings Printer…
For syringes with an inner diameter of approximately 15.75 mm. I use it for flux syringes, which unfortunately arrived without a pusher.
The original design is very good. While I was using the bagel slicer, I noticed that I needed to press down on the bagel
Earlier models of Traeger smoker grills had a recessed button to change the "p-setting" which regulates the interval time for the pellet auger in the "smoke" mode. The "p-setting" is supposed to be a way to tune the smoker so that it…
Simple pair of pusher for 50ml epoxy glues. No supports needed, print upright.
This remix is to extend the centre pillar to push the trackball a little bit further.
Pusher extension for the Nerf Rayven/rayvenfire. This does require a mag adapter, of which none of the dart zone/xshot adapters work (because they position the mag in the middle of the adapter instead of being farther forward). I use a…
Modular pusher mount for the TBRC Warlock (full size). This mount will allow for easy swapping of motors without having to cut glue. To install: If printed on a glass bed, roughen the glue surface of the plane mount, and glue the plane…
Since I've implemented a filament cutter I needed one to fit my specific needs, which is a right sided pusher arm to press my sherpa mini filament cutter which I've printed mirrored in x axis.…
There is a distinct lack of mod parts out there for the elite alpha trooper, and so I made my own. These parts can give serious upgrades to your EAT. Notes: * Requires worker's breech/dart gate. If anyone wants to design a new dart gate I…
Aid tools for mechanical keyboard assembly. The forks are inserted between the plate and the circuit board and ease the building process by keeping the gap between these two components consistent. The switch pushers protect your…
Select Fire Pusher! This in essence a “merging forward” of Skwiggums' Shirdal Gryphon into the newer protean. This builds a fully modular pusher unit for a Protean blaster that should be compatible with any other stocks and receivers. It…
Running PEX pipe in tight spaces and during remodeling jobs can be a challenge, especially when faced with obstacles, restricted spaces, and pesky insulation. Introducing The PEX Pusher , the tool you didn't know you needed that makes…
A small magnet gluing jig that helps you remember the magnet orientation. Can use multiple magnet sizes. Bill of Material 5x2mm magnets (by default, but you can change the size in the Fusion files) bit of super glue Print files The Magnet…
This is made with the Silver Reed LK150 in mind. The gauge is set to 6.5mm. Feel free to print them all or just the specific ones you need!
Edit to add V2: frame V2 with standoffs, through holes to screw it down to a plate. Frame narrowed in the front to have two stand closer together M5 top to screw on to the front, not to scratch and pushed buttons and to have option to…
... this is the perfect digital to analog interface for mechanical engineers! Consists of a "button pusher arm" and a bracket to hold down the servo. I used two of these to automate my coffee maker: first servo pushes power button, a…
I use 1.75mm filament which is perfect for many recessed bind buttons. The problem is that usually misplace them if they're in my bag for the googles etc. Mainly because of this I made a knob to hold onto which “might” result in them…
I made a big mistake and put my boards up, with half of them not being aligned with the other half… so had to push out a dozen or so inserts out. My thumb complained… so here's one with a little longer lever to go easier on the thumb :).…
This design is a clip that fits over a rada mechanical shower timed valve and keeps the water flowing without having to keep pressing the button. The cap fits over the button, press, and turn to lock onto the water pipes. Simple,…
UPDATE 14.01.2025: updated the fid/midlock variant i've added the accents back into the cover, and added 3 more versions of the pusher cover. these are currently untested, but i don't see how they won't work just fine. the M3 insert slots…
We lost the food pusher for our rotary grater, so I made a new one. This is it, it works well. Update 20-01-2025: We recently found the original pusher - this one is closer to the blade than the original and so ends up with less “ungrated…
Hi everybody, I make this new pusher for my Moulinex easy fresh grater. I broke the original, too fragile! I redesign more stronger and in one volume, to give in easy to wash. Print with PETG filament. Have a good print ☺
This was created in Fusion and can be tweaked to fit your seed tray of a different brand as long as it has holes in the bottom to push the seedlings out. You can make the base thicker if you want but I found that 1/16" was sufficient. I…
This was created in Fusion and can be tweaked to fit your seed tray of a different brand as long as it has holes in the bottom to push the seedlings out. You can make the base thicker if you want but I found that 1/16" was sufficient. I…
Tandem Magazine. A double stack-ish short dart magazine for full-length magwell. This Magazine REQUIRES a Modified Pusher to Function Properly! Currently Available: Magnet Embedded Pusher Demo: Features Tandem Magazine is basically…
Hardwares One 4 * 4 mm cylindrical magnet. I used N52 grade ones. Assembly Press the magnet into the hole of the pusher. Apply some glue if it's too loose. Replace the original parts with these modified parts, the assembly process is…
The Big Agnes stakes have a unique shape, so I made this pusher to make it much easier to push them into the ground. The pusher weighs 7g-10g, depending on how you slice the model. Added loop version too. My printing setup: Material:…
small device which helps to push a stuck ESP32-S3-DevKitC into the breadboard Print settings: PLA 0.2mm speed presets 3 perrimeters 25% gyroid infill
If you have a 9 mm bulky knitting machine and lack needle pushers, then you need these. I designed these to be simple and quick to print. So far I have the following combinations: 1 x 1 2 x 2 and 3 x 3 2 x 1 and 1 x 2 3 x 1 and 3 x 1 4 x…
Big Lor and Dirty D collabed to bring you this crucial component to your Clip Mania sleeper build. This pusher allows you to convert your blaster to a half dart flinging machine.
Spingifilo per Sharebot NG, 100% infill Category: 3D Printer Extruders
UPDATED FILES Did you let a coworker try out your Longshot, and did he subsequently break the pusher while somehow full sending a double feed so bad it required a full disassembly of your blaster? Cause I did, and thats why I designed…
This is 3-part model of pusher design for Prusa MK4S to clip on the bracket from Fan. With proper g-code you can eject your prints from front part of the bed after cooling down. This is the simplest solution for automatic printing with…
Shared with permission from LeedleDynamics! If you remix this part, please reach out to LeedleDynamics to discuss permission to publish it. This alternate part for the Hush II might help if you're using Thanhlon mags and the darts keep…
Hello everyone! This is a 3D printed replacement dart pusher/breech for the Nerf Pro Torrent that allows for magazine swapping without needing to prime the blaster. While you can load and unload a magazine in a stock Torrent without…
This is a 3D scanned button for Casio watch and printed in PETG. It's not so great but it works :).
A modified pusher for Demolisher to make it able to use my Tandem Magazine. Hardwares One 4 * 4 cylindrical magnet. I used N52 grade ones. Screws from the blaster. Glue Printing Files are pre-oriented. I use 5 walls on all parts and the…
Adapters for Straight and Angled Talon Magazines. Hot swappable and doesn't need to trim the reinforcing ribs in the magwell. Requires a modified pusher to work with it. Check this collection for more detail. After inserting it, pull the…
This is prop limiter for following components: Aeronaut CAM Carbon 10x6 CCCN 95030039 https://www.hacker-motor-shop.com/aero-naut-camcarbon-10x6-folding-propeller.htm?shop=hacker_e&SessionId=&a=article&ProdNr=10648300&p=1960 Center piece…
Allows you to turn your small rocker switches into smart switches. For use with the Tuya MoesGo 2nd Generation Fingerbot Plus . Fusion 360 files attached to edit the sizes however you like. You may need to experiment with the sizes until…
Print Instructions - Universal Tent Stake Pusher 🖨 Print Settings: • Layer Height: 0.2mm • Nozzle Size: 0.4mm • Walls: 3 • Top/Bottom Layers: 3 • Infill: 20% • Material: PETG or ABS • Filament Size: 1.75mm 🌡 Temperature Settings: •…
I tried to design an indestructible frame taking advantage of Prusa XL multi material print capabilities. My configuration: LIPO: 2S 450mah FC: Flywoo GOKU F405 HD 1-2S ELR AIO V2 Motors: HGLRC SPECTRE 1202.5 Motore Brushless 11000KV…
I made this to push and pull chips around my mill. Uses standard 2020 Aluminum Extrusion (like this) . Use any length of 2020 to fit your needs. I have one that is ~18", and another that is ~40" Assemble with sixteen M4 Screws. Direct…
This is a tool for pushing the GMT hand on watch. Printed in PLA
Remix of the Nexus Pro skinny pusher that adds extra length to remove a lot of the slack during priming. As a result, this pusher can no longer feed full length darts. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
A fully parametric dosing funnel with pusher. Adaptable to all models and sizes.
This is a simple Remix of the Original-Parts, to not Print Parts in Mid-Air and even make the part with only 45Degree Edges All Other Parts can be used from the Original Part-List-Needed for 1 CFS: 32x 693ZZ Bearings ( 8 for each Pusher )…
Little hand saver tent peg pusher doodad with hole for paracord loop for attaching to something. I have shown a screenshot of my slicer settings, but they are not set in stone, I tried an “ultralight” version that was 1.7g lighter, but it…
Replacement for food processor pusher. Print in PETG or other food safe filament.
Had some problems with the pusher catching on the back of the darts in the mag and damaging them, so I did this. Works really well from what I see. The instalisation instructions are shown on the photos. be careful not to remove too much…
The original model from Jerry's Random Stuff didn't quite fit in the stryfe, so I made some adjustments so that they'd work. You'll still need the original lever pin, pusher head, and pusher pin from the original model. You'll also need…
