Nerf Pro Torrent Skinny Dart Pusher/Breech
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A dart pusher/breech for the Nerf Pro Torrent that allows for magazine swapping without needing to prime the blaster
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 188
- Makes
- 1
- Views
- 1,127
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Hello everyone! This is a 3D printed replacement dart pusher/breech for the Nerf Pro Torrent that allows for magazine swapping without needing to prime the blaster. While you can load and unload a magazine in a stock Torrent without priming the blaster, I didn't like the feeling of flexing internal parts when doing so. Skinny pushers are a quite popular blaster modification, so I was surprised when I went looking for one for the Torrent and found nothing. So, I decided to make one, and here's the result!
This breech replaces the stock breech, and uses the stock o-rings from the stock breech. While the skinny breach does have a slightly thinner air path due to the thinner profile of the breech, no meaningful drop in fps was found when using a stock spring. I recommend printing this part with 100% infill, regardless of print orientation, to increase the strength of this part as much as possible.
I had a lot of fun working on this project, and I hope everyone else enjoys it as much as I have!
A huge thank you to GP3D for testing this part for me!