Pickle Pusher
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.31 – €0.38 net (excluding VAT)
For file: pickle_filter_50mm_0.2mm_PLA_MK3S_27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.34 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 27 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Kitchen tool to keep your pickles from bobbing up past the liquid layer. Requires food safe materials and processing.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 122
- Makes
- 1
- Views
- 1,029
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU General Public License v2.0
When making pickles or sauerkraut, you need to keep the vegetables below the water level to prevent mold from growing on them. This simple print lets the liquid through and pushes the vegetables below the liquid level!
Keep in mind that with food contact there are many considerations that should be followed.