Counting matching models…
A previous model I designed used a piece of cloth or paper to allow gases to escape while keeping the bugs out of my one-gallon kombucha jar. It occurs to me a similar goal could be achieved with a tight infill. So, I returned to the…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for PETGSource material: PET
Vine Fermentation Lid was created for preparing vine from fruits and herbs in 4 litr jar. It consists from lid, burbling pipe and small cup with water.
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
I needed a "holey" lid to accomodate an air lock for my jars. After browsing various collections without finding what I needed I measured an existing glass lid, drew the profile in Fusion360 and rotated id around the centre hole. It's not…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
Simple drip tray for fermentation jars with 86 mm lid size (wide mouth). Made to catch brine or liquid that may escape during fermentation. The ribs inside the tray keep the jar slightly raised so liquid can collect underneath without the…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
11 mm stock. Fill with around 30 ml of water. No supports needed.
Print 8 of these clips (or more) to attach a fermentation belt to your at. I recommend using some kind of plastic that handles heat well, so plan jane PLA might not be the best choice. Picture is ASA filament. Fermentation built I used…
These lids screw on perfectly on Mason jars but require the use of silicone gaskets to be 100% airtight (available from Amazon). They have a threaded hole in the middle to screw in the threaded airlock stem. The tightness of the fit may…
This is a Lacto Fermentation Lid for canning jars. Heavily/completely based on the excellent work by AlexEnglish. I got started on Lacto Fermentation because of my daughters' ongoing GI issues. The doctors have worked around to trying…
Here is a mod to showcase the use of the Saturn 2 Riser project . This allows pass though of the InkBird temperature sensor and power for a fermentation belt to be a vat warming system. requires 2 m3 bolts and nuts. The outlet section of…
ABS/PETG Wall thick 1mm so that the printing process is faster but stronger. Diameter 10mm
Hi folks, I found gltovar's original model for the Saturn 2 and thought it'd be a great solution for my Saturn 1 while trying to print in the middle of winter. Unfortunately, the Saturn v1 has different tank dimensions than the Saturn 2,…
v2: Sturdier legs. Use Tinkercad to adjust diameter, # of spokes, or # legs: https://www.tinkercad.com/codeblocks/jJmyNjh8erJ?sharecode=1a5ml5Z9M7okvXvlCJasKOzuBLIufdqxqspndya6cnU This is my own design for a fermentation weight (aka,…
Pour garder les légumes bien submergés To keep vegetables well submerged update : add/ajout 50 mm
Improved clips for fermentation band
The possibility of a support in the middle.
For Fermentation diameter 15mm small. various thickness variations
This is a very simple Adapter from a female 1/4" BSP thread to an opening which can accept a common fermentation airlock tightly. I use this to connect a fermentation Airlock to my spunding valve via a Duotight-1/4 BSP adapter. This…
Intended to be used with food safe filament, a small glass bowl put upside down in the trough, and water to seal between the lid and bowl. Used to protect fermenting foods from unwanted contamination while allowing gasses to escape…
Quick design to fit quart mason jars. Has posts to keep whatever you're fermenting submerged without weights with a hole for standard airlocks: https://www.amazon.com/gp/product/B00IGXQ5I4/ref=ppx_yo_dt_b_asin_title_o01_s00 Category:…
One-way fermentation plug with water valve. Inspiration for Czech speakers: https://www.zkvaseno.cz Print with 100% fill. I recommend using a non-toxic PET-G filament with food grade certification. Aim to achieve watertight print…
Fermented foods are rich in probiotics and good for your stomach. It’s simple to do and only requires 3 ingredients. Vegetables (Cabbage is most popular), Water, Salt. Nature does the rest. To make sauerkraut, you need to keep all the…
As October brings the spookiness of Halloween, don't let your veggies feel left out. Turn them into hauntingly delicious pickles, and let the flavors of the season cast their magical spell! The fermentation lid made of PETG is designed…
Just print, make hole and fermentation kombucha, vegetables, mashroom. Print from PET-G. Set higher temperature anf filament flow for water resisstant.
Small plugs I designed to fit the holes in my fermentation bucket. The small one is designed to fit the top hole from the cover where the bubbler goes The big one is designed to fit the tap hole from the side. I printed in TPU/Flex to…
i made this to keep cloth nice and snug over my jar for kombucha making. I designed this for IKEA korken 2L tall jar. No idea if it will fit other jars but i think it is kinda standard size. Ive printed it in PLA but it may be better to…
Die Dichtung die mit dem Gärglas kommt, ist viel zu dünn. Diese Dichtung ist flexibel und sitzt perfekt im Deckel, sodass das entstehende CO2 seinen Weg durch das Gärröhrchen nehmen kann. The seal that comes with the fermentation tube is…
Der Gärstopfen hat die Maße: unterer Ø 21mm oberer Ø 27mm Bohrung Ø 9 mm Gedruckt aus TPU/Flex. Der Stopfen dichtet gut ab und erfüllt seinen Zweck. The fermentation plug has the dimensions: lower Ø 21mm upper Ø 27mm hole Ø 9 mm Printed…
Printed with organic supports and PETG on a Prusa Mini.
This is a cap for a demijohn to attach a fermentation tube. I’m mainly keeping it for my own reference,
This Fermentation Monitor can measure the yeast activity by measuring the produced CO2 bubbles with a refraction sensor. The bubbles are detected by a laser diode and a laser photo resistor. The bubbles refract the laser beam and…
A remix of the clip by @AlbionRapture which has been widened to just about 12.34mm so that it can clip to the HeyGears RS/RS Turbo vat.
AlexEnglish, on thingiverse, remixed it and made it better and more compact, please check his model out. Updated model (V2) to work with modern printers (original printer was a Cupcake) and designed to fit modern canning jars.…
This fermentation bottle funnel makes it easier to fill fermenation bottles. It has an outer diameter of 27mm.
Simple trays to rest large ball jars on when fermenting beat kvass. The trays will hopefully help catch any of the staining liquid should the fermentation process cause them to bubble over. We find that our beats can be fermented twice…
Spacer to keep your Tempeh fermentations well aereated.Spacer to keep your Tempeh fermentations well aereated. These spacers provide 50mm distance between two appropriately cut plates. A plate template is included. These spacers can fit…
Heavy fermentation balloons can easily slip through your hands, these handles make it easier e.g. to lift them out of their transport baskets. Customization: FreeCad model is included to allow custom neck sizes. Different sizes can be…
What it is A one-piece, screw-on lid for wide-mouth (86 mm) mason jars . A hollow plunger reaches 2 in (50.8 mm) below the rim and presses on the outer edge of a standard 70 mm glass fermentation weight, so the weight can't float up and…
A lightweight circular wire rack to lift ferments (like tempeh moulds) from the bottom of the instant pot. The metal one left rust spots and didn't lift it enough from the water bath, so I made my own. Print in something heat resistant,…
Disclaimer: Fermentation/Homebrewing can vary in legality from country to country. Check local laws before attempting to do so. Consume alcoholic beverages responsibly and only according to local laws. I will not be responsible for any…
A remix of the clip by @AlbionRapture which has been widened to just about 12.34mm so that it can clip to the HeyGears RS/RS Turbo vat.
These lids screw on perfectly on Mason jars but require the use of silicone gaskets to be 100% airtight (available from Amazon). They have a threaded hole in the middle to screw in the threaded airlock stem. The tightness of the fit may…
This is a simple mod of the lid for a Mason jar airlock. The unmodified parts are also included for convenience.
![Fermentation rack spacers (MSTACK) [WIP]](https://media.printables.com/media/prints/9d78151c-2652-4619-bfbc-c7b4345d0ae2/images/11001153_3fc65f86-4c88-4f8b-917a-8a7dcc535cb9_1c433341-64d1-4b1d-baf9-e5220d23f2ff/spacer-plates.jpeg)
