Fermentation weight for wide-mouth jars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
65mm diameter fermentation pusher with extra long legs.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 164
- Makes
- 0
- Views
- 688
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
v2: Sturdier legs. Use Tinkercad to adjust diameter, # of spokes, or # legs:
https://www.tinkercad.com/codeblocks/jJmyNjh8erJ?sharecode=1a5ml5Z9M7okvXvlCJasKOzuBLIufdqxqspndya6cnU
This is my own design for a fermentation weight (aka, “Pickle Pusher”) for wider-mouthed Bell jars. The legs are extra long. When the lid is closed, the weight will help keep vegetables below the surface of the brine.
The leg are pretty fragile so be careful when removing this from the print bed. 100% infill will help reduce breakage.
If a leg breaks off, you can heat the end with a lighter and reattach it.
100% infill to sturdy the legs
Combing set to “All” to reduce stringing between the spokes
