Fermentation weight for wide-mouth jars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
65mm diameter fermentation pusher with extra long legs.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
v2: Sturdier legs. Use Tinkercad to adjust diameter, # of spokes, or # legs:
https://www.tinkercad.com/codeblocks/jJmyNjh8erJ?sharecode=1a5ml5Z9M7okvXvlCJasKOzuBLIufdqxqspndya6cnU
This is my own design for a fermentation weight (aka, “Pickle Pusher”) for wider-mouthed Bell jars. The legs are extra long. When the lid is closed, the weight will help keep vegetables below the surface of the brine.
The leg are pretty fragile so be careful when removing this from the print bed. 100% infill will help reduce breakage.
If a leg breaks off, you can heat the end with a lighter and reattach it.
100% infill to sturdy the legs
Combing set to “All” to reduce stringing between the spokes
