True Hybrid Dart Pusher for Nerf Stryfe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printable Hybrid Dart Pusher, that works with full- and half lenght Darts
- Rating
- 4.667 / 5
- Likes
- 71
- Downloads
- 560
- Makes
- 4
- Views
- 1,885
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
A printed Pusher so your Stryfe or other compatible Blaster can shoot Half- and Full lenght Darts.
Print this flat agianst the Bed. A 0.2 layer height should be suffiecent. 2-3 Walls/Perimeters and 10-20% Infill.
I printed mine out of PC for Longevity and slight flexibility.
This is a complaint mechanism after all, so i recommend a slightly flexible Filament such as PETG or similar.
I had to drill out the screw hole with a 2mm drillbit, but that maybe due to the warping of the PC Filament i used.
I should work with the two Worker® Magazine adapters you can see on the picture.