True Hybrid Dart Pusher for Nerf Stryfe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable Hybrid Dart Pusher, that works with full- and half lenght Darts
- Ocena
- 4,667 / 5
- Polubienia
- 71
- Pobrania
- 560
- Wydruki
- 4
- Wyświetlenia
- 1885
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
A printed Pusher so your Stryfe or other compatible Blaster can shoot Half- and Full lenght Darts.
Print this flat agianst the Bed. A 0.2 layer height should be suffiecent. 2-3 Walls/Perimeters and 10-20% Infill.
I printed mine out of PC for Longevity and slight flexibility.
This is a complaint mechanism after all, so i recommend a slightly flexible Filament such as PETG or similar.
I had to drill out the screw hole with a 2mm drillbit, but that maybe due to the warping of the PC Filament i used.
I should work with the two Worker® Magazine adapters you can see on the picture.