Aluminium Tent Stake Pusher/Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Push your tent stakes into the ground effortlessly! No more damaging your palms, shoes, no need to carry a stake hammer!
- Rating
- 5 / 5
- Likes
- 89
- Downloads
- 825
- Makes
- 3
- Views
- 6,371
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a simple solution to issues associated with trying to push small aluminium tent stakes into the ground - and getting your palms cut due to small surface area of the stake, or deforming them if using a hammer. This simple tool increases the surface area making it easy to drive the stakes even into tough ground. Lanyard hole for small diameter reepschnur/cord will make it more difficult to lose :)
This part is not meant to be secured to a single stake permanently! Load a stake, push it into the ground with your palm (or hammer), take the handle off the stake, load another stake, rinse & repeat! Carry just one in your stake bag, and use until it breaks :)
Should fit majority of triangular (3 sides) stakes supplied with current tents. The tolerances are quite loose to make it easy to fit uneven/damaged stakes as well. Have different stakes? Hit me up with the dimensions, I will be happy to remake this model to fit yours as well.
I've uploaded .3mf file that includes the lanyard hole and an infill modifier - that makes the central part of the handle completely solid (100%) so that it can be used to withstand hammer blows should you need them (see pictures)
Print in PETG (ASA could work as well), at 20% infill or more, >3 perimeters. I printed it with a 0.6 nozzle