P
Printables
Ryobi HP54LVN 4v Screwdriver Multiboard Mount
A home for your Ryobi HP54L 4v Screwdriver and its to best bit buddies. They can all now hang out on a multiboard near you.
Search results: driver
Counting matching models…
P
Printables
Lego Compatible Steam Engine Driver Rods
I have printed all of these at .2 or .15 mm in PETG. Worked well in operation.
P
Printables
Parkside Screw driver performance PBSPA 12 station
Let me introduce you to my modular parkside pbspa 12 cordless screwdriver workstation. Any part can be printed separately and then joined together. There is no need any support with printing.
P
Printables
Gridfinity holder for Wera Kraftform Micro Electronics Precision Screwdrivers
Gridfinity holder for Wera Kraftform Micro Electronics Precision Screwdrivers. The holder is sized so that even the longest screwdrivers in the Wera 05073675001 Kraftform Micro-Set/12 Sb 1 Screwdriver Set will fit. Not sure about drivers…
P
Printables
Honda Stem Nut Driver - 07916-KA50100 Replacement
3D printed tool to replace Honda Tool 07916 - KA50100 Used to remove and install the steering stem nut on 226 different Honda Motorcycles. The nut I designed this part around is P/N: 53229-MN1-650 You can check fitment by clicking here ,…
P
Printables
M6 Nylon Bolt Screwdriver for RC Aircraft and Gliders
A simple tool for field assembly of all RC models that take nylon M6 screws to hold its parts together. Designed for my Multiplex Lentus for attaching horizontal stabilizer. Small size makes it ideal to leave in transmitter case to have…
P
Printables
Gridfinity Wera Kraftform Screwdriver Holder
Print the legs lying down. No supports necessary If you want to use an MMU and print the colored hexagons accents. Assemble with glue if you like.
P
Printables
Multiboard Holder For Milwaukee Ratcheting Screwdriver
In the original design of this holder, the tool is held with the center of gravity much higher than the top of the model. This forced the top of the handle (as seen in the picture) to be unstable and tip outward (not shown in the…
P
Printables
Gridfinity iFixit Precision Bit Driver Tray
A shallow tray to store your iFixit precision bit driver in prime position for instant grabification. Pictured is an older revision of the ⅓ height version. For Gridfinity by Zack Freedman .
P
Printables
Shahe torque screwdriver wall mount
I've been using good old nails to organize torque wrenches on my barn's wall, but when I got this torque screwdriver things started to get fancier.
P
Printables
Desk Tray for Vessel Ball Grip Electric Screwdriver
A minimalist tray for Vessel Ball Grip 220USB Electric Screwdrivers. Spaces for extra bits or bit adapters.
P
Printables
Gridfinity iFixit Mahi 1/4" Bit Driver Tray
A shallow tray to store your iFixit Mahi 1/4" Bit Driver in position for instant grabification. Pictured is an older revision of the ⅔ height version. The models have since been modified to increase tolerances in problem areas. For…
P
Printables
Container for Allen keys or even long screwdrivers
Contenitore x chiavi a brugola o pure cacciaviti lunghi con fori profondi 25mm stampato in PETG
P
Printables
Qidi Plus4 Stepper Driver cooling Fan
The stepper motor drivers on my Qidi X-Plus 4 were reaching temperatures of up to 100°C. I mounted a 40mm x 40mm radial fan with a 3D printed mount. This reduced the temperatures by around 30-40°C. You will need a 40mm x 40mm radial fan…
P
Printables
WIHA TORX AND IP TORX SCREWDRIVER HOLDER T6-T25 6IP-25IP
I designed this for our machine shop. We rotating carbide indexable tooling and this holder is very convenient. Holds a full set of wiha t6-t25 and 6ip to 25ip. The T20 and T25 are the T handle ones, rest are screwdriver style. Attach to…
P
Printables
Imperial Hex Driver Set Makeover
I have a ratty old, but aways useful, imperial hex driver set but it’s missing the slip-on handle that is essential for the added torque often required. I was working in PETG and thought it would be the perfect material for a new handle!…
P
Printables
Paintron (PSD S1 ACE) Electric Screw Driver Gridfinity
This is a remix of the Hoto Electric Screwdriver Gridfinity by ethanthompson here on Printables. I needed a box to fit the Paintron Electric Screwdriver from Amazon. I used PrusaSlicer's cut tool to chop the original up and overlay the…
P
Printables
60mm (2.5") screwdriver bit holder box v2
Bit holder box that is designed to hold 10 standard 2.5 inch 60mm long screwdriver bits. Lid closes with two indents and can be opened by pulling. The bits are loose fit inside the holder. A lanyard hole is provided for portability. I…
P
Printables
Worx WX240L Cordless Screwdriver Stand
A bench top stand for a Worx WX240L Cordless Screwdriver and the included bits. .4mm nozzle .3 mm layer height, I used paint on supports in the section for the screwdriver and manually changed the "Pattern Angle" so they would run…
P
Printables
hard driver holder ACT
This holder was designed for act encloser with dimensions 121X78X15XR5
P
Printables
LTT screwdrivers mounts
Mounts for the regular LTT screwdriver and the precision screwdriver. Easy to grab, easy to return, hard to fall off on its own. Low material usage and footprint. Both designs require an empty insert If the stubby selection ring and shaft…
P
Printables
MBOX Makita electric screwdriver Bosch pro inlay
A MAkita MBOX inlay for a Bosch Pro electric screwdriver / drill
P
Printables
Multiboard Wiha Picofinish screwdriver holder Onshape / Parametric
A Wiha Picofinish driver holder for the Multiboard Mounting System remixed from @S_T_A_R_K_E_159558 's skadis version. The Onshape file can be copied and edited here , but if you go this way, I would still appreciate a download and a like…
P
Printables
Gridfinity Tray for Performance Tool driver set
I recently picked up this "Performance Tool 1908 21-Piece Offset Ratcheting Driver Set" and wanted a gridfinity tray to help organize it in my mini tool box. I designed this tray to fit the existing socket and bit holders so I could still…
P
Printables
Screw Driver Handle
Handle for screws. 100x20mm Has a hole for a 5x3.5mm magnet If you wish, you can add fuzzy skin to the outer perimeter
P
Printables
HSW iFixit Mako Screwdriver holder + Tweezer clamps (No Logo)
Honeycomb Storage Wall Mako driver set holder with tweezer storage. Logo has been removed from original.
P
Printables
Gridfinity for Vessel screwdriver
1x1 Gridfinity Magnets are 2x6mm. Pressure fit or glue in models included
P
Printables
Small Screwdriver Handles
This is designed to use ¼" shank bits by epoxy gluing them into the handle. You can print a bunch of them and glue in different types and sizes of bits to each one, or do what I did and print just one and glue in a magnetic bit holder.…
P
Printables
PARKSIDE 12V cordless screwdriver AND battery holder / Wallmount
Wallmount battery holder for the 12V PARKSIDE Performance ( Bauforum24 Edition) cordless screwdriver AND the battery. Is it also available for screwdriver ONLY . Made especially for users who won't let their cordless screwdriver rest with…
P
Printables
modified ratcheting screwdriver
ratcheting screwdriver without the ltt logo. i used tree supports for the whole model. use 100% infill for the ratchet and the bit holder. turn on detect thin walls so that the bit holder and the ratchet print correctly because otherwise…
P
Printables
MakeDo compatible bit for Bosch Toy Screwdriver Klein
To be able to use the Bosch toy screwdriver with MakeDo screws, I conveniently edited @GuillaumeRico 's FreeCad file for M12 bolts. The motor is barely powerfull enough to actually screw the MakeDo screws in more solid cardboard, but it…
P
Printables
Lego Duplo screwdriver tool
This is a cute little electrical screwdriver for Duplo figures. I tried to design it so it doesn't look like a gun. I used PETG with 100% infill and it is super sturdy this way. I don't see much risk of small parts breaking off, but since…
P
Printables
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base)
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
P
Printables
Long screwdriver bits case
Design Concept The Long Screwdriver Bits Case is a cylinder case with a threaded lid, designed for efficient storage and easy identification of 100mm length screwdriver bits. Each case has 6 hex-shaped holes for securely holding the bits…
P
Printables
bitholder / screwdriver
Small bit holder for use as screwdriver. It is made of ABS for more stability. There is a countersink at the bottom of the hole to press or glue in a 5x1 magnet. Under the following link you will also find a nut driver with the same…
P
Printables
Wera Screwdriver Holder
This is my take on designing a perfect screwdriver holder ;). I went through a lot of designs already present on thingiverse and borrowed some ideas from a few, mainly 2918462 and 3671735 . They both are excellent designs however they…
P
Printables
Screw and Socket Driver Handle
Handle for hex shank screw or socket driver. There are 4 different files sized slightly differently for different fit tolerances. The permanent fit is pretty tight, the drivers are meant to be tapped in with a mallet and are not meant to…
P
Printables
Element System: Screwdriver holder
This model is useful as a screwdriver (and not only the screwdriver) holder. It's fully extensible by adding the mounting model per your needs. The angle strip is made from wood. The mine is bought from the Bauhaus:…
P
Printables
Soleilwear Screwdriver Kit Model JD1006 Holder (HSW)
Soleilwear Screwdriver Kit Holder (Honeycomb Storage Wall Compatible) - Remix I wanted a HSW compatible holder for my Soleilwear Screwdriver set (Model JD1006). This one:…
P
Printables
Gridfinity PicQuic Screwdriver Holder
A gridfinity holder for a picquic screwdriver. I have a sixpack plus, but I'm sure it will work with other models. It's not super refined, but it works well enough. I have included the freecad files for it, if you want to edit it.
P
Printables
1/4" hex bit holder for DeWalt drills/drivers w Tool Connect
Remix of @LowellAlleman's excellent bit holder but modified to fit the newer tool bases. Many new Dewalt Tools include a bump out in the base to allow for inserting their Tool Connect tracker which interfered with the original model in…
P
Printables
Skadis Screwdriver Mounts (Wera) for Ikea Pegboard (under 30 min!)
Hello Everybody, I have designed 3 different sizes of screwdriver mounts for my skadis pegboard. You can use these with any screwdriver, as long as their shaft is not too big for the hole in the center. I have mounted my Wera VDE…
P
Printables
Screwdriver Mount for iFixit
Keep your precision screwdrivers organized and easily accessible with this custom-designed screwdriver mount/holder, perfect for IKEA Skadis pegboards. Designed specifically to fit the iFixit screwdriver, it also accommodates other…
P
Printables
Gridfinity Electric Screw Driver Holder
Gridfinity Electric Screw Driver Holder 1x1x9 for 35mm circle shaped grip tools. 京セラ(旧リョービ)製 充電式スクリュードライバー BDX-4V向けのGridfinityホルダーを製作しました。 コスパに優れており、非常に扱いやすくDIYのオトモに最適です。 https://www.kyocera-industrialtools.co.jp/products/home/items/5914…
P
Printables
Universal ergonomic screwdriver
Universal Ergonomic Screwdriver (Remix) This is an updated version of the popular universal screwdriver, focusing on improved ergonomics and an expanded set of collets. The main changes concern the shape of the handle — it now fits much…
P
Printables
SKADIS Precision Screwdriver Bit Holder
Printed in PLA, 0,4mm nozzle, 0.2mm layers and support for the hooks. I chose to go with simple hooks to be able to easily move the holder on the SKADIS board. Seems plenty strong with the 3 hooks.
P
Printables
Pegboard Screwdriver Inserts for 20mm holders
There is a conical hole in the upper part of the insert so that the screwdriver can be easily inserted into the holder. The diameter of the hole for the screwdriver is 11 mm.
P
Printables
HSW 10 x Driver / File holder (2 parts)
A remix of https://www.printables.com/model/1199150-hsw-hex-screwdriver-holder Made it longer & then duplicated it
P
Printables
T-Handle Precision Bit Driver
This is a compact and ergonomic T-handle driver designed for a fixed or non-standard bit. The bit is securely inserted a
P
Printables
The Techie - Back cover with screwdriver holder
The Techie is a back cover with a built-in precision screwdriver holder, designed for the CMF Phone 2 Pro. The model should load into your slicer in the correct orientation. I printed it at .2mm layer height, 80% infill, tree supports,…
P
Printables
Parametrical Screwdrivers Holder (Solidworks)
Parametrical Screwdrivers Holder (Solidworks), to change you need to use Solidworks 2022 or later
P
Printables
Simple Hex Driver Stand
19.04.2026 rev. II I've added holder with 7 slots for more screwdrivers A compact, self-standing organizer designed specifically for hex screwdrivers. Perfect for keeping your desk or workbench neat and tools always within reach.…
P
Printables
Universal ergonomic screwdriver V2
Universal ergonomic screwdriver V2 (new length and shape) compartable with all original collets. New elements and changes: Bigger round handle Collet for 9mm blades Collets for 4mm 6mm bits with rotation stopper Collet for deburring tool…
P
Printables
gridfinity screwdriver holder
het is een gridfinity houder voor een kleine schroefendraaier
P
Printables
Replacement handle for yellow screwdriver
If you have bought an Anet A8 or any laser cutter in the late 2010s, you probably got one of these infamous yellow reversible screwdrivers. I didn't even know it was reversible for the longest time and kinda forgot about it till I…
P
Printables
HSW 6mm socket screwdriver holder
I recommend using @ku7_tech's improved hex inserts https://www.printables.com/model/926144-honeycomb-storage-wall-improved-hex-inserts . This holds a 6mm socket screwdriver with its widest diameter 12mm. I printed two of them to hold it…
P
Printables
Insert for Precision Screwdrivers for Gridfinity Tray
This is a remix of the insert for @RdeBrouwer_2049195's https://www.printables.com/model/937862-gridfinity-precision-screwdriver-set-draper. This insert allows for slightly larger screwdrivers. The end rests have moved 10mm further away…
P
Printables
Screwdriver Holder (9 & 17)
Simple remix of a screwdriver holder. It holds 9 screwdrivers instead of 10. It is a little thicker and has a bit more space between screwdrivers. (hence why it holds only 9). There is also a version that holds 17 screwdrivers. It might…
P
Printables
Altoids tin bit and driver holder
mini ratchet: https://www.amazon.com/dp/B0DVV76J5M klein extension: https://www.amazon.com/dp/B09R2L4GFJ personally recommended bit set (dealers preference everyone has different needs) https://www.amazon.com/dp/B005QSD6TI
P
Printables
Motion Pro 08-0550 Steering Head Bearing Race Driver Set Holder
I purchased a Motion Pro 08-0550 Steering Head Bearing Race Driver Set and wanted a holder to put them in my toolbox, the race adapters snap in place.
P
Printables
Hotwheels Hybrid Connector for Thrill Drivers Corkscrew
Quick printing. I did try it without supports but like the results better with .
P
Printables
1/4 inch and 4.2mm screwdriver bit holder
I recently made a tool organiser using Bento3D and I wanted to store both 4.2mm and ¼ inch screwdriver bits in one holder. So I remixed my older model to accomodate both sizes. I printed in TPU because it has enough grip to hold the bits…
P
Printables
Little Screwdriver
Hey guys thats my first modell i post on Printables :) This is a little screwdriver, inspired from a parkside screwdriver, but fully self made. With a little Pressure the Bit fits into the Hole in the Front. maybe sometimes it doesnt fit,…
P
Printables
Ergonomic Screwdriver - Holder
I modified the design to fit my screwdriver base. it is 0.1mm smaller in diameter and has extensions on the corners, so it fits very snugly. I printed with: 0.4 nozzle, 4 wall, 4 top, 4 bottom, 80 infill rectilinear.
P
Printables
Roslon Screwdriver Gridfinity Bin
Gridfinity insert for this screwdriver set. I have changed the model. It is slightly different from the photo as I have made the hole for a finger bigger to allow easier access.
P
Printables
Screw drivers stand- For Hex, Philips and Slotted Screwdrivers
This stand is designed for storage of precision screwdrivers. The construction ensures stability and easy access to tools. Especially designed for Hex, Philips and Slotted screwdrivers Each holder 1329-2.1 and 2.2 should be tapped on…
P
Printables
Different sizes for the "Redesigned inserts for the Precision Screwdriver Case"
Another remix of the inset for the "Precision screwdriver case" by TimATX
P
Printables
Gridfinity Screwdriver Holder
This is a Gridfinity Screwdriver Holder made for the Ergonomic lockable bit screw driver from HD_Creator. There is a place to put the screwdrivers and the locking nuts separately. Support me by using my referral code on Prusa Website:…
P
Printables
Skadis screwdriver holder
Skadis screwdriver holder Circle diameter: 10.50 mm Square diameter: 27 mm Comment if you have optimization ideas or change requests
P
Printables
LTT Precision screwdriver bit set Skådis T Nut holder
LTT Precision screwdriver bit set IKEA Skådis | T Nut System The holder is compatible with the T Nut system for Skadis developed by @6d6178 and uses 2 T Nuts with M2.5 screws (12mm length / 14mm length). This model prints cleanly in its…
P
Printables
Proxxon screwdriver holder for IKEA Skadis
in various sizes/spacings, with a separate badge.
P
Printables
Skadis / SKÅDIS LTT Screwdriver Holder
Holder for the LTT Screwdriver for attachment to an Ikea Skadis pegboard. It uses special pegs designed by @KimJanosch. These can be found here: Skadis/ SKÅDIS universal peg
P
Printables
BAK Revolver 4s Driver Side End Cover
BAK Revolver 4s Driver Side End Cover. This is still a work in progress. I printed this one to make do in the meantime. Anyone who has this tonneau is probably missing theirs as well. I made the insert so you can glue it in place, and it…
P
Printables
Holder for chisel, grains, driver, tool- Set, Gedore
Copy of the GEDORE Holder 4x Slots 10mm Tools 2x Slots 12mm Tools
P
Printables
1/4 Inch Driver Bit Holder
This 3D printed holder securely organizes your 1/4" driver bits, keeping them readily accessible. The design is compact and can be easily mounted to pegboard or other surfaces. Keep your workspace tidy and efficient. The design includes a…
P
Printables
Screwdriver Handle for 1/4" Magnetic Bit Holder
You can mount a universal magnetic holder for ¼” hex bits through the drilled hole, no adhesive required. An editable file has also been added.
P
Printables
Milwaukee 2407-20 M12 3/8” Drill/Driver Holder (Free Standing)
A desk holder for a Milwaukee M12 drill. It has holes in the bottom for mounting, or a foot to enable it to free stand
P
Printables
HSW Vessel Electric Screwdriver holder
Created a HSW holder for the Vessel Electric Screwdriver based on the fitting bases designed by @KYZ Design. Uses 2 vertical mounts.
P
Printables
W.O.R.D.32 - Workshop-Organized Repository of Drivers (holds 32)
Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled.
P
Printables
Fanttik E2 Driver Holder With Bit support
A simple base to support your fanttik bit holder and driver itself, allowing the bits to be selected with a knob instead of clumsy fingers. To assemble the base, simply press the grey rotary bit storage into the base until the “ring” sits…
P
Printables
Xiaomi Precision Screwdriver Gridfinity Cutout
A 5 x 1 Gridfinity Cutout for the Xiaomi Precision Screwdriver set. The cutout is designed to keep the item upright to save space. It can be printed in 0.24 Draft settings, and the item will still sit perfectly inside. I designed a…
P
Printables
Fortnite bus driver grave
This model pays respect to the Fortnite bust driver who was a part of a lot of people's life in gaming and hobbies. I personally don't play Fortnite anymore, but I just wanted to pay my respects.
P
Printables
Eye Driver
I've often found eyehooks a pain to screw in; this tool adapts a socket to allow you to drive a 20mm eyehook. A 20mm eyehook refers to its length; the standard one has a 2mm wire gauge with 9mm of thread. The eye is approximately 10mm…
P
Printables
Gridfinity Parkside Electronic precision screwdriver holder
Original deign by @TheRedE, I just added a few extra spaces for driver bits.
P
Printables
Cardboard Screwdriver
The handle will require supports, as it's best to print horizontally. I recommend a higher infill on the bit as well. Any layer thickness works. @JudahChang_579681 Cardboard Screws are the best I've used.
P
Printables
Multiboard Screwdriver Holder
A screwdriver holder for multiboard. Fastened to the back using the Mid Tread bolt so it can be threaded into a snap if needed.
P
Printables
Eye Bit / Driver
I've often found eyehooks a pain to screw in; this tool adapts a socket to allow you to drive a 20mm eyehook. A 20mm eyehook refers to its length; the standard one has a 2mm wire gauge with 9mm of thread. The eye is approximately 10mm…
P
Printables
Gridfinity Socket Driver Adapter Holder 1/4
Gridfinity Socket Driver Adapter Holder 1/4 1x 1/4 Socket to 1/4" hex bits (6.35mm) 150mm long 1x 1/4 Socket to 1/4" hex bits (6.35mm) 65mm long 1x 1/4 Socket to 1/4" hex bits (6.35mm) 24mm long Gridfinity 1x4 3u size Optimized print…
P
Printables
Rugged Case for Harbor Freight Icon 4 Piece Professional Mini Screwdriver Set
Rugged case for Harbor Freight Icon 4 piece professional mini screwdriver set. Screwdrivers snap into place. Might be hard to snap in for a while. Uses 6x M3x30 screws. Print 2 latches and 1 of everything else. Here is the screwdriver…
P
Printables
Multiboard screwdriver holder in various sizes
A set of screwdriver holder for multiboard. The angled orientation allows for easy removal of the screwdrivers, and multiple rows can be stacked in a minimum of space. Diameters are 4, 5, 6, 7, 8, 10, 12, 14, 16mm.
P
Printables
Carroussel for 12 watchmaker screwdriver2
Easy to print. Upperpart needs support on the bed. I used PETG en works well. Layerheight of 0.15mm is advised.
P
Printables
Bahco BE-9886 Wall Mount Screwdriver Holder + Logo Badge
Description Wall-mounted holder designed for the Bahco BE-9886 screwdriver set (Bahco ERGO handles). It keeps the drivers organized, easy to grab, and makes the set look tidy in a workshop. Not a "front-split" version. Drivers must be…
P
Printables
Gridfinity 5x1 Precision Screwdriver Stand
Made this to hold 8 screwdrivers I got with this glasses kit years ago: https://www.amazon.com/dp/B095SDNYNZ and have since always had lying around my computer room without a place to "live". Tried to make the design not care TOO much…
P
Printables
Skadis for Bosch GSR 12V (&18V) Screw Driver - Ultimate Set (incl. holders for Charger GAL, Battery GBA, Flexi Click GFA)
English Description This model set includes IKEA SKÅDIS–compatible holders for Bosch Professional GSR 12V Screw driver and its accessories , mounted using the Low Profile T-Clip from @tchoupshop_82950 . The models are designed to: provide…