Wheelchair Cup Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cup holder to mount on the "Push" handles of a wheelchair. The two main parts simply fasten together with M4…
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 186
- Wydruki
- 1
- Wyświetlenia
- 1157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a cup holder to mount on the "Push" handles of a wheelchair. The two main parts simply fasten together with M4 screws.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Generic PLA & TPU Black
Notes:
Two of the grips are needed if used, these are printed in tpu and pushed into the slots on the bracket to prevent the cup holder from rotating.
You need to clear out the holes as they have a single layer to help with the printing of what would be an overhang.
Category: Other