DIY Quadchair/Wheelchair for small pets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an easy DIY wheelchair for pets with any type of mobility issue.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 839
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The chair works well for dogs up to 10 pounds, not tested for heavier pets but should work just fine.
This project additionally requires M3 screws, ½" PVC pice, a couple of 3 directional connector elbows, a full-body harness with 2 attachment points, a couple of caster wheels, and a couple of end caps for PVC pipes.
I have attached some reference images so that you can assemble the chair on your own.
if you have any questions about the chair or want to get a few printed for an animal support shelter(or anything else) then, please contact me via my email: [email protected]