1 / 5
Suzuki DL650 2017-23 spacer for Mosko Moto Backcountry Pannier kit — image 1
1 / 5

Suzuki DL650 2017-23 spacer for Mosko Moto Backcountry Pannier kit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Spacer to go between GIVI Outback PL3112CAM racks and the Backcountry Panniers

Rating
0 / 5
Likes
3
Downloads
17
Makes
0
Views
768
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Spacer to go between GIVI Outback PL3112CAM racks and the Backcountry Panniers
 

The prints are testet with 100% infill for thermal stability and printed in FilaLab PETG Filament and stock Suzuki exhaust.

After riding in heavy slow traffic for more than an hour , there are no melting and there are no deformation.

 

I have only tested the print in PETG filament, but PETG seems to have sufficient thermal stability for the job.

 

 

There are 2 parts:

The pannier spacer RH v5 is for the right hand side, its a 50mm spacer so that the pannier does not hit the exhaust. It's only tested with the stock exhaust!

The pannier spacer LH v1 is just to offset the left hand pannier a little.

 

You need to print 4 spacers to mount one pannier.

if you want both sides to be symmetrical just print 8 pannier spacer RH v5

 

Mounting hardware needed:

for pannier spacer RH v5:

8 Pcs. M6 X 80mm bolts

for pannier spacer LH v1:

8 Pcs. M6 X 50mm Bolts 
 

Tags