Rhino Rack Awning Pin CA1186 CA1175
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Awning pole pins for Rhino Rack Batwing and Foxwing Awnings - Reinforced
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Replacement pole hinge pin for a Rhino Rack Batwing/Foxwing awning.
The OEM version of this is made of PA6 but I have printed these in ASA and PETG successfully.
Use 5 Wall loops and 25% infill.
To get a strong part there is a reinforcement rib that should be glued in place with 2 part epoxy glue (See pics). The part is not really strong enough in PETG without this added step.
An alternative is to make a metal reinforcement rib using the included part as a template, but I haven't had any failures since using the epoxy method. (Yes, you could easily break it if you wanted to but this applies to the original part as well)