Rhino Rack Awning Pin CA1186 CA1175
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Awning pole pins for Rhino Rack Batwing and Foxwing Awnings - Reinforced
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Replacement pole hinge pin for a Rhino Rack Batwing/Foxwing awning.
The OEM version of this is made of PA6 but I have printed these in ASA and PETG successfully.
Use 5 Wall loops and 25% infill.
To get a strong part there is a reinforcement rib that should be glued in place with 2 part epoxy glue (See pics). The part is not really strong enough in PETG without this added step.
An alternative is to make a metal reinforcement rib using the included part as a template, but I haven't had any failures since using the epoxy method. (Yes, you could easily break it if you wanted to but this applies to the original part as well)