Touchscreen case for 10.1" Pi console
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Front bezel and rear case for the 10.1" Raspberry Pi touchscreen sold by pidisplayconsole.com and other similar units. I have seen others that look identical but I don't know brand names.
I printed this using Hatchbox PLA on the Bambu X1C with a Wambam build plate. I used a 5mm brim on the outside. Without this I had a corner lift on an earlier iteration.
Front bezel has holes for brass M3 inserts. 240 x 171mm, it just fits on the X1C sitting square, you may be able to use a smaller bed if rotated. The inserts have to be very straight for the screws to line up.
Mine was assembled with M3 x 16 button head screws. STEP and STL files included.